714389
53
Zoom out
Zoom in
Previous page
1/64
Next page
EN
53
Cleaning and Maintenance
www.bora.com
Cleaning in the dishwasher
Place the components face down in the dishwasher.
No water should be able to gather in the grease filter
components.
Wash on a programme with a maximum temperature
of 65 °C.
If it is no longer possible to clean the grease filter
completely, it must be replaced.
9.3.3 Fitting the components
Assembling the grease filter unit
INFO It is not necessary to apply pressure when
assembling the components. The grease filter
unit is designed so that the individual parts can
be assembled without force and with no room for
error.
Carefully insert the grease filter into the tray.
Ensure that the lock clicks into place.
Do not force the grease filter into the tray.
If you notice any resistance whilst inserting the grease
filter, you just need to turn it around.
Fitting the grease filter unit
INFO The grease filter unit can only be fully inserted
without resistance if it is facing the right way.
If the instructions are followed correctly, it is
impossible to fit it incorrectly.
Carefully insert the grease filter unit into the cooktop
extractor.
Do not force the grease filter unit into the cooktop
extractor.
If you notice any resistance whilst inserting the grease
filter unit, you just need to turn it around.
Fitting the air inlet nozzle
Insert the air inlet nozzle.
Make sure it is positioned correctly.
9.3.4 Replacing the recirculated air filter
In recirculation mode, an additional activated carbon
filter is used. The activated carbon filter absorbs cooking
odours. The activated carbon filter is installed on the
plinth fan or the duct system.
INFO Regularly replace the activated carbon filter.
The service life can be found in the operating
instructions for the relevant activated carbon
filter.
INFO You can obtain activated carbon filters from your
specialist supplier or by contacting BORA via the
website at http://www.bora.com.
Tilt the air inlet nozzle [1] from its horizontal position.
Remove the air inlet nozzle [1] with your other hand.
Removing the grease filter unit
Fig. 9.2 Removing the grease lter unit
Remove the grease filter unit.
To do this, use the handle inside the grease filter unit.
Disassembling the grease filter unit
Fig. 9.3 Removing the grease lter
Remove the grease filter from the tray.
To do this, push in the 2 locking tabs on each end of
the filter.
9.3.2 Cleaning the components
The air inlet nozzle, grease filter and tray can be cleaned
manually or in a dishwasher.
Disassemble the grease filter unit prior to cleaning.
Manual cleaning
Use a cleaner and degreaser in one.
Rinse the components with hot water.
Clean the components with a soft brush.
Rinse the components well after cleaning.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora CKI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora CKI in the language / languages: English as an attachment in your email.

The manual is 14,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora CKI

Bora CKI User Manual - German - 64 pages

Bora CKI User Manual - Dutch - 64 pages

Bora CKI User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info