714393
18
Zoom out
Zoom in
Previous page
1/64
Next page
EN
18
Appliance description
www.bora.com
4.2.3 Overview of features and functions
Features CKA2
Automatic fan detection
Electronic power adjustment
Interface communication
Compact grease filter unit
Functions
Automatic after-run
Power setting
Automatic extractor function
Filter service indicator (recirculation mode)
Safety devices
Control lock
Safety shut-down
active error monitoring
Tab. 4.7 Overview of features and functions
4.2.4 Structure
Cooktop extractor CKA2
4
3
2
1
Fig. 4.5 BORA Classic cooktop extractor CKA2
[1] Air inlet nozzle
[2] Grease filter unit
[3] Cooktop extractor
[4] Control unit
4.2.5 Cooktop extractor functions
Power control
The power levels are adjusted via the operating panel
by tapping or swiping movements on the touch slider.
Alternatively the power levels can also be set using the
touch buttons and above and below the touch
slider.
Extractor power setting
When the power setting is activated, maximum extractor
power is available for a predefined time.
This power setting makes it possible to suction away high
levels of cooking vapours more quickly. After 10 minutes,
the power setting is automatically switched to power level
5.
Automatic extractor control
The extractor power level automatically adjusts itself
depending on the current cooktop settings. No manual
adjustment of the fan controls is necessary but it is
possible. The extractor power is automatically adjusted to
the highest power level used on all cooking zones that are
currently in use.
Function Power levels
Cooking level 1 2 3 4 5 6 7 8 9 P
Extractor power 3 3 3 4 4 4 5 5 5 P
Tab. 4.8 Extraction performance and cooking level
A change in the power level of a cooking zone results
in automatic adjustment of the extractor power after
a delay of 20 seconds on induction cooktops and 30
seconds on all other cooktops.
Automatic after-run
The cooktop extractor continues to run at a lower level
and switches off automatically after a defined time.
The duration of the after-run function can be set in the
menu (10 to 30 minutes). The default duration of the
after-run function is 20 minutes.
When the extractor is switched off at the end of
cooking the automatic after-run function is activated.
Once the automatic after-run period has lapsed the
cooktop extractor switches itself off.
INFO BORA expressly recommends use of the cooktop
extractor after-run function.
Recirculation filter service indicator
The cooktop extractor filter service indicator is
automatically activated when the end the activated
carbon filter service life is reached (only in recirculation
mode).
If the fan symbol lights up yellow and the multi-
function display
1
F
1
L
t
appears after switching on
the cooktop extractor, this is informing you that the
filter needs to be changed soon.
If the fan symbol lights up in signal red and the
error code
E
F
1
L
t
is shown in the multi-function
display after switching on the cooktop extractor, the
end of the filter service life has been reached and
the filter must be replaced (also see Cleaning and
Maintenance chapter).
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora CKG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora CKG in the language / languages: English as an attachment in your email.

The manual is 14,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora CKG

Bora CKG User Manual - German - 64 pages

Bora CKG User Manual - Dutch - 64 pages

Bora CKG User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info