714388
35
Zoom out
Zoom in
Previous page
1/64
Next page
EN
35
Operation
www.bora.com
Activating the automatic extractor function for a
cooking session
Tap the fan button .
The fan symbol lights up blue.
An animation appears on the slider.
A
appears in the 7-segment display.
6.4.4 Switching the fan off
Swipe downwards to power level 0.
or
tap until power level 0 is reached.
or
long press on the fan button .
The automatic after-run function is started.
As soon as the automatic after-run stops, the cooktop
extractor fan is switched off.
6.4.5 Switching off the automatic after-run
early
Tap the fan button
or
tap the minus button
The cooktop extractor after-run function is switched
off.
INFO BORA expressly recommends use of the cooktop
extractor after-run function.
6.5 Operating the cooktops
INFO To be able to operate the cooktops, cooktop
operation must be active in the operating panel
(colour mode “red”).
INFO If no commands are entered within 3.5 seconds
when the cooktop operating panel is active,
the system automatically switches back to fan
operation (standard display).
6.5.1 Selecting cooking zones
INFO With this system you can operate and control up
to 4 cooking zones at the same time.
Tap on a cooking zone.
The system changes to colour mode “red”.
The system switches to the power display.
The additional cooking zone functions appear.
Cooking zone operation is activated and you can make
settings for the chosen cooking zone.
Repeat this process to operate further cooking zones if
necessary.
INFO A cooking zone can be switched off early by
a further touch command in the cooking zone
display. The system then immediately switches to
fan operation.
Increasing the power level
Swipe upwards to the required power level
or
tap until the required power level is reached
or
tap a higher position on the slider
or
long press on (power level is increased in twos: 0,
2, 4...)
Reducing the power level
Swipe downwards to the required power level
or
tap until the required power level is reached
or
tap a lower position on the slider
or
long press on (power level is decreased in twos: ...
4, 2, 0)
6.4.2 Fan power setting
Activating the power setting
Long press on the slider at position 5
or
Tap on when power level 5 is active
An animation appears in the slider.
ßp
appears in the display (flashing 3x at first and then
continuous).
INFO After 10 minutes, the power setting is
automatically switched back to power level 5.
Deactivating the power setting
The fan power setting is deactivated early if another
power level is set (see Setting the fan power level).
6.4.3 Automatic extractor function
INFO The automatic extractor function automatically
adjusts the extraction performance to the
highest power level used on all cooking zones
that are currently in use. If the power level of a
cooking zone is changed, the extractor power is
automatically adjusted.
INFO On induction cooktops there is a 20-second delay
in the power level adjustment and on all other
cooktops there is a 30-second delay.
INFO The automatic extractor function can be disabled
manually at any time.
Permanently activating the automatic extractor
function
see the Menu chapter, menu item 3: Automatic extractor
control
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora CKFI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora CKFI in the language / languages: English as an attachment in your email.

The manual is 14,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora CKFI

Bora CKFI User Manual - German - 64 pages

Bora CKFI User Manual - Dutch - 64 pages

Bora CKFI User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info