714391
30
Zoom out
Zoom in
Previous page
1/64
Next page
EN
30
Initial operation
www.bora.com
Starting fan configuration
Fig. 5.3 Starting fan conguration display
Touch the slider
Fan configuration is started.
During fan configuration the slider interface and the
fan symbol will flash.
INFO When fan configuration is complete, the display
will stop flashing.
INFO If fan configuration was successful, the slider
interface and the fan symbol will turn
green.
INFO If fan configuration was not successful, the slider
interface and the fan symbol will turn red.
Checking fan recognition
Check that the system has recognised all fans
correctly.
Indicator Colour Result
green 1 fan recognised
green 2 fans recognised
red 0 fans recognised, error
(see Troubleshooting chapter)
Tab. 5.1 Possible results of the fan recognition
INFO If a window contact switch is connected during
fan recognition, it must be taken into account that
this will also give approval (window open).
5.1.5 Completing basic configuration
When you have successfully completed all of the steps in
the basic configuration menu:
tap the flashing navigation button
The system adopts and saves the settings made and
the standard display is shown.
Confirm and save the setting by moving to the next
menu item (tap the flashing navigation arrow ).
5.1.3 Menu item J:
F
t
Y
ßp
Select the filter type
(only in the case of recirculation)
INFO Menu item J only appears if the “recirculation
system” operating mode has been selected during
configuration of the extraction system.
The type of filter installed must be defined.
There are two different filters to choose from:
Filter type 1 (
F
1
)= BORA air cleaning box ULB1/ULBF
Filter type 2 (
F
3
)= BORA air cleaning box ULB3
Fig. 5.2 Selecting the lter type display
Select the type of filter installed (t
ap the corresponding
segment on the slider ).
Confirm and save the setting by moving to the next
menu item (tap the flashing navigation arrow ).
INFO For recirculation filters from other manufacturers
filter type 1 (
F
1
) must be selected.
5.1.4 Menu item L:
F
A
n
Fan configuration
INFO During fan configuration the type of fan installed
and the number of fans are automatically
recognised by the system and the configuration is
adjusted accordingly. During initial operation it is
necessary for the installer to check that the fans
have been recognised correctly.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora CKCH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora CKCH in the language / languages: English as an attachment in your email.

The manual is 14,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora CKCH

Bora CKCH User Manual - German - 64 pages

Bora CKCH User Manual - Dutch - 64 pages

Bora CKCH User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info