714400
14
Zoom out
Zoom in
Previous page
1/32
Next page
EN
14
Installation
www.bora.com
6 Installation
Observe all safety and warning information (see the
Safety section).
INFO The device must not be installed above cooling
devices, dishwashers, stoves, ovens, washing
machines or dryers.
INFO The contact surfaces of the worktops and wall
sealing strips must be made of a heat-resistant
material (up to approx. 100 °C).
INFO Worktop cut-outs must be moisture-sealed
using suitable means or, where necessary,
fitted with a thermal insulator.
6.1 Checking the scope of delivery
Name Quantity
Cover plates 2
Operating and installation instructions 1
Sealing tape for the cooktop extractor 1
Stainless steel grease filter 1
Height adjustment plate set 1
Cooktop extractor frame 1
CAT 5 communication cable 1
Lenshead screws 4
Power supply cable 1
Protective grid 1
Silence module 1
UDB Universal sealing tape 1
ULS Universal plinth fan 1
CSEE Classic control unit 1
Substructure module 1
Curved transition piece 1
Straight transition piece 1
Tab. 6.1 Scope of delivery
Check the scope of delivery for damage and make
sureTab. 6.1omplete (see tab. 6.1).
If there are any missing or damaged parts, please
notify BORA After Sales Service.
Do not under any circumstances install parts which are
damaged.
Dispose of transport packaging in the proper manner
(see the Decommissioning, disassembly and disposal
section).
6.2 Tool and aids
The following tools are required to correctly install the
cooktop extractor:
Pencil
Tape measure
Phillips screwdriver Z2
Black, heat-resistant silicone sealant
Fine saw
6.3 Assembly instructions
6.3.1 Safety clearances
1
3
2
Fig. 6.1 Recommended minimum clearances
Maintain the following safety clearances:
[1] Rear minimum clearance of 50 mm between the worktop
cut-out and the rear corner of the worktop.
[2] Minimum clearance of 50 mm from the left and right of
the worktop cut-out to the adjacent cabinet or wall. For
ergonomic reasons and to ensure efficient cooktop extraction,
a minimum clearance of 300 mm is recommended.
[3] Minimum clearance of 600 mm between the worktop
and the wall unit. A minimum clearance of 1000 mm is
recommended for ergonomic reasons.
6.3.2 Work surface and kitchen units
Create the worktop cut-out taking the specified cut-out
dimensions into account.
Make sure that the cutting surfaces of the worktops
are properly sealed.
Observe the instructions provided by the worktop
manufacturer.
Cross bars on the unit in the area of the worktop cut-
out may need to be removed.
Cable protection (false floor) should be mounted
below the appliances. This needs to be removable for
maintenance work.
The drawers and/or shelves in the floor unit must be
removable.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora CKASE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora CKASE in the language / languages: English as an attachment in your email.

The manual is 6,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora CKASE

Bora CKASE User Manual - German - 32 pages

Bora CKASE User Manual - Dutch - 32 pages

Bora CKASE User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info