714387
36
Zoom out
Zoom in
Previous page
1/64
Next page
EN
36
Operation
www.bora.com
Reducing the power level
Tap the required cooking zone
Swipe downwards to the required power level
or
tap until the required power level is reached
or
tap a lower position on the slider
or
long press on (power level is decreased in threes:
... 6, 3, 0)
INFO If after setting a power level on induction
cooktops CKFI, CKI and CKIW no suitable
cookware is detected (pan size recognition) within
9 minutes, the corresponding cooking zone will be
automatically switched off.
Power-level adjustment on the Tepan
stainless steel grill CKT
INFO The Tepan stainless steel grill power levels are
shown in the corresponding cooking zone display
as a 7-segment font (
1
-
9
,
ßp
).
When a cooking zone is selected the temperature
is shown in °C in the multi-function display above
the slider (temperature indicator).
INFO During the initial heating phase the actual
temperature is shown in the multi-function display
until the target temperature is reached in the
selected cooking zone.
Increasing the temperature
Tap the required cooking zone
Swipe upwards to the required target temperature
or
tap until the required target temperature is reached
or
tap a higher position on the slider
or
long press on (power level is increased in threes: 0,
3, 6...)
INFO During the heating phase the red hot button
flashes, even if the operating panel display
changes to the standard display after 3.5
seconds. When the target temperature is reached,
it stops flashing.
Changing to another cooking zone
INFO
When you are in cooktop operating mode (colour
mode “red”) and adjust the settings for one
cooking zone, you can immediately change over to
and operate another cooking zone.
Tap another cooking zone within 3.5 seconds.
The cooking zone lights up in the operating panel
display.
Operation of the second cooking zone is activated.
The first cooking zone is dimmed in the operating
panel display and the previous settings are adopted.
6.5.2 Setting cooking zone power levels
INFO The cooking zone power levels are shown in
the corresponding cooking zone display as a
7-segment font.
The cooking zone power levels can be adjusted in
different ways:
tap on or
adjustment using the slider
by tapping a certain position on the slider
long press on or (adjustment in threes)
Additional instructions for gas cooktop CKG:
INFO After setting a power level, gas cooktop CKG is
automatically ignited and the cooking zone is
operated at the set power level.
INFO The ignition process happens several times in
succession and generates a typical clicking noise.
INFO If it does not ignite, the procedure can be
repeated. When the desired cooking zone is
selected and the power level is set, the cooktop is
automatically reignited.
Power-level adjustment on cooktops CKFI,
CKI,
CKIW, CKCH, CKCB and CKG
Increasing the power level
Tap the required cooking zone
Swipe upwards to the required power level
or
tap until the required power level is reached
or
tap a higher position on the slider
or
long press on (power level is increased in threes: 0,
3, 6...)
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora CKA2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora CKA2 in the language / languages: English as an attachment in your email.

The manual is 14,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora CKA2

Bora CKA2 User Manual - German - 64 pages

Bora CKA2 User Manual - Dutch - 64 pages

Bora CKA2 User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info