714399
20
Zoom out
Zoom in
Previous page
1/28
Next page
EN
20
Operation
www.bora.com
Prerequisite
The cooking zone has been selected.
A power level was set.
Press the timer button .
The indicator light will blink and
00
will appear in the
cooking zone indicator.
Press or to set the required time.
Press the timer button again to activate it.
Activation will take place within 10 seconds of the
button last being pressed.
Changing the timer settings
Press the time button for the cooking zone.
The indicator light blinks.
Press or to set the required time.
Switching the timer off early
Press the time button for the cooking zone.
The indicator light blinks.
Press until the timer display shows
00
,
or
press and simultaneously. The time in the timer
display is immediately set to
00
.
6.1.10 Activating/deactivating the
childproofing feature
INFO If a cooking zone indicator alternates between
displaying
L
and
H
, the cooking zone is still hot.
Activating the child safety lock
Prerequisites:
The cooktop is switched on.
The cooking zone is switched off.
Press sensor buttons and simultaneously on the
cooking zone.
L
is displayed in the cooking zone indicator. The child
safety lock is activated.
Deactivating the child safety lock
INFO If a cooking zone indicator alternately shows
0
and
H
, the cooking zone is still hot.
Prerequisites:
The cooktop is switched on.
Press sensor buttons and simultaneously on the
cooking zone.
The child safety lock is deactivated.
6.1.9 Using the timer function
You can use 2 timer functions:
Short-time timer (egg timer), no automatic switching
off of a cooking zone.
Automatic cut-off for automatically switching off the
cooking zone.
You can set a time range of between 1 and 99 minutes for
both timer functions.
If you press first, 1 minute will be pre-set as the
starting time.
If you press first, 30 minutes will be pre-set as the
starting time.
Switching off the timer signal tone
Press any sensor button on the operating panel to end
the signal tone prematurely.
Setting the short-time timer (egg timer)
INFO The active cooking zone indicator shows
that the short-time timer is activated.
The remaining time is displayed.
After the end of the time set, 00 will be displayed for a
few seconds on the timer display. A signal tone will sound
for a few seconds.
Prerequisite
The cooktop must be switched on.
Press the timer button.
The indicator light will blink and
00
will appear in the
cooking zone indicator.
Press or to set the required time.
Activation will take place within 10 seconds of the
button last being pressed.
If the cooktop is switched off with the on/off button
, the cooking zone indicator will become active and
the remaining time will be displayed.
Changing the timer settings
Press to switch on the cooktop.
The timer indicator light blinks.
Press or to set the required time.
Setting the automatic cut-off
You can set an automatic cut-off for every cooking zone.
INFO The active cooking zone indicator shows
that the automatic cut-off is activated.
The remaining time is displayed.
After the end of the time set, the cooking zone turns off
automatically.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora CIW11 Classic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora CIW11 Classic in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora CIW11 Classic

Bora CIW11 Classic User Manual - German - 28 pages

Bora CIW11 Classic User Manual - Dutch - 28 pages

Bora CIW11 Classic User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info