714398
19
Zoom out
Zoom in
Previous page
1/28
Next page
EN
19
Operation
www.bora.com
6 Operation
Observe all safety and warning information during
operation (see the Safety chapter).
INFO The cooktop may only be operated when the
stainless steel grease filter of the cooktop
extractor is installed (see operating
instructions for cooktop extractor).
INFO Clean the cooking zone before using the
cooktop for the first time (see the Cleaning
chapter).
6.1 Switching cooktop on/off
Switching on
Press to switch on the cooktop. The power level
0
is displayed in the cooking zone indicators.
If no power level is set after switching on the
appliance, the cooktop will turn off after a few
seconds.
Switching off
INFO Use the operating panel to switch off the
cooking zone after use. Do not rely on the pan
detector.
Press to switch off the cooktop.
Pay attention to the residual heat display
(see the Device Description chapter).
6.1.1 Switching on the cooking zone
Press the button for the desired cooking zone. The
0
in the cooking zone indicator lights up more brightly.
The cooking zone indicator light illuminates.
6.1.2 Adjusting the power level
Press to set power level
5
to set power level
9
.
6.1.3 Changing the power level
Press or until the required power level is shown
in the cooking zone indicator.
6.1.4 Switching on the power setting
INFO Both cooking zones are equipped with a power-
enhancing power setting.
If a cooking zone is operated at power setting
P
, the other
cooking zones can be operated at a maximum power level
of
5
. If the power setting is increased to
5
, the power level
will switch back to
P
.
Continue pressing until power setting
P
is
displayed in the cooking zone indicator.
After 10 minutes, the cooking zone is automatically
switched back to power level
9
.
6.1.5 Switching the power setting off early
Continue pressing until the lower power level that
you want is displayed.
6.1.6 Switching off the cooking zone
INFO If a cooking zone indicator shows
H
,
the cooking zone is still hot.
Continue pressing or until the cooking zone
indicator displays power level
0
. The display will show
a
0
for a few seconds.
Press and simultaneously.
6.1.7 Pause function
INFO The pause function switches off automatically
after 10 minutes.
Press the pause button on the cooktop to briefly
interrupt the cooking session.
I I
is displayed in the cooking zone indicator.
Press the pause button again followed by or
to end the pause function.
By pressing the button when the pause function is
active, the previous setting can be activated again within
6 seconds.
To do so, press the button and then .
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora CI11 Classic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora CI11 Classic in the language / languages: English as an attachment in your email.

The manual is 3,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora CI11 Classic

Bora CI11 Classic User Manual - German - 28 pages

Bora CI11 Classic User Manual - Dutch - 28 pages

Bora CI11 Classic User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info