714525
33
Zoom out
Zoom in
Previous page
1/44
Next page
EN
33
Operation
www.bora.com
Resetting the filter service display
If the activated charcoal filter was replaced (only for
recirculated air) and the stainless steel grease filter was
cleaned, it will be necessary to reset the filter service
display.
Switch on the cooktop with integrated cooktop
extractor.
The fan level indicator shows an
F.
Press and simultaneously for at least three
seconds until a
0
flashes in the air level indicator.
After a few seconds,
0
will be displayed permanently.
The filter service display has been reset.
7.4 Saving energy
Follow all of the energy-saving tips to use the cooktop
with integrated cooktop extractor in an energy-efficient
manner.
When purchasing cookware, pay attention to the
diameter of the base. Usually the upper diameter of
the pot is given. The diameter of the base is often
smaller.
Use pressure cookers. Due to the closed cooking
chamber and the overpressure, pressure cookers save
the most time and energy. The short cooking time
helps preserve vitamins.
Make sure there is sufficient liquid in the pressure
cooker. An empty pot which is still being heated can
lead to overheating. The cooking zone and the pot may
be damaged by overheating.
If possible, always close cookware using a suitable lid.
Choose a suitable size of cookware commensurate
with the amount of food you are cooking. A big pot
that is barely filled requires a lot of energy.
Fig. 7.2 Fan level sequence
7.2.3 Switching on the delayed automatic
after-run
Continue pressing until fan level
n
for delayed
automatic after-run is shown.
The fan runs in level 1 and switches off automatically
after 10 minutes.
7.2.4
Switching off the cooktop extractor
Press and simultaneously until the fan level
indicator
0
is displayed,
or
press or several times until the fan level
indicator
0
is displayed.
When the fan level indicator displays
0
, the cooktop
extractor is switched off automatically after a few
seconds.
7.3 Pay attention to the filter service
display
If the fan level indicator displays
F
(F = filter service
indicator), this means the activated charcoal filter is used
up (for recirculated air only) and the stainless steel grease
filter needs an overhaul.
If you do not wish to do the filter change yet, e.g. if you
only cook occasionally:
Press or to go into the normal operating mode.
0
is shown in the fan level indicator.
Changing the filter
Switch off the cooktop with integrated cooktop
extractor.
Observe all warnings that are described in the Cleaning
chapter.
Replace the activated charcoal filter.
Clean the stainless steel grease filter, the air inlet nozzle,
the air guiding housing and the housing base.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora BHU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora BHU in the language / languages: English as an attachment in your email.

The manual is 7,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora BHU

Bora BHU User Manual - German - 44 pages

Bora BHU User Manual - Dutch - 44 pages

Bora BHU User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info