714523
19
Zoom out
Zoom in
Previous page
1/44
Next page
EN
19
Assembly
www.bora.com
6 Assembly
Observe all safety instructions and warnings
(see Safety chapter).
Follow the enclosed manufacturer’s information.
INFO The mains connection cord must be provided by
the customer.
INFO The device may not be installed above cooling
devices, dishwashing machines, stoves, baking
ovens as well as washing and drying machines.
INFO The contact surface of the worktops and
the wall sealing strip must be made of a heat-
resistant material (up to approx. 100 °C).
INFO Worktop cut-outs must be moisture-sealed using
suitable means and, where necessary, fitted with
a thermal insulator.
INFO The integrated cooktop extractor must not
be used with other cooktops.
6.1 Checking the scope of delivery
Name Quantity
Hyper glass ceramic cooktop with integrated cooktop
extractor
1
Air inlet nozzle 1
Stainless steel grease filter 1
BAKF activated charcoal filter (only BHU) 2
Flexible duct (only BHU) 1
EURO screws (only BHU) 6
Duct extension for extracted air, horizontal BLAVH1
(only BHA)
1
Mounting brackets 5
Sealing tape 1
Glass ceramic scraper 1
Cable routing clips 3
Operating and assembly manual 1
Lenshead screws 5
Drilling template 1
Height compensation plate set 1
Tab. 6.1 Scope of delivery
Check the scope of delivery for damage and make sure
it is complete.
If there are any missing or damaged parts, please
notify BORA Customer Services immediately.
Do not under any circumstances install parts which are
damaged.
Dispose of transport packaging in the proper manner
(see Decommissioning, Disassembly and Disposal
chapter)
6.2 Tool and aids
The following tools are required for the correct installation
of the cooktop:
Pencil
Drill or cordless drill with a 5 mm wood bit (for the
back wall)
Compass saw or handsaw
Drilling template for cut-out on back wall (included)
Phillips screwdriver Z2
Silicone sealing compound for sealing cutting surfaces
6.3 Assembly instructions
6.3.1 Safety distances
Maintain the following safety distances:
1
3
2
Fig. 6.1 Recommended minimum clearances
[1] Minimum distance of 50 mm at the back between worktop
cut-out and the rear edge of the worktop.
[2] Minimum distance of 300 mm from the left and right of the
worktop cut-out to the adjacent cabinet or wall.
[3] Minimum distance of 600 mm between the worktop and the
wall unit. A minimum clearance of 1000 m is recommended
for ergonomic reasons.
6.3.2 Worktop and kitchen units
Create the worktop cut-out taking into account the
specified cut-out dimensions.
Make sure that the cut surfaces of the worktops are
properly sealed.
Comply with the instructions of the worktop
manufacturer.
Cross bars on the kitchen unit in the area of the
worktop cut-out may need to be removed.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora BHAS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora BHAS in the language / languages: English as an attachment in your email.

The manual is 7,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora BHAS

Bora BHAS User Manual - German - 44 pages

Bora BHAS User Manual - Dutch - 44 pages

Bora BHAS User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info