714526
39
Zoom out
Zoom in
Previous page
1/48
Next page
EN
39
Cleaning and maintenance
www.bora.com
8.4.2 Cleaning the air inlet nozzle and
stainless steel grease filter
INFO Clean the stainless steel surfaces in the polishing
direction only.
INFO If the stainless steel grease filter can no longer be
cleaned completely, this means the stainless steel
grease filter will need to be replaced.
Manual cleaning
Use a degreasing cleaning agent.
Rinse the inlet nozzle and stainless steel grease filter
with hot water.
Use a soft brush to clean the inlet nozzle and stainless
steel grease filter.
After cleaning, rinse the inlet nozzle and stainless steel
grease filter well.
Cleaning in the dishwasher
Rinse the air inlet nozzle and the stainless steel grease
filter with a rinsing program at a maximum of 65 °C.
8.4.3 Installing stainless steel grease filter
and air inlet nozzle
Grab the stainless steel grease filter using the handle [2]
(Fig. 7.2)
Insert the stainless steel grease filter [1] into the
suction opening.
Make sure that the stainless steel grease filter rests
against the bottom housing base. A lock is not needed
and is not provided.
Reach into the access opening [2] of the inlet nozzle
with your hand (Fig. 7.1).
Insert the air inlet nozzle (Fig. 7.1; [1]) centrally into
the suction opening.
Press the air inlet nozzle upwards until it engages.
8.5 Cleaning the air guiding housing
Greasy deposits and limescale residues from the cooking
vapour can accumulate on the surface of the air guiding
housing. Regular, thorough cleaning (see Table 7.1) is
thus necessary.
The air guiding housing is on the underside of the cooktop
in the floor unit.
8.5.1 Opening the air guiding housing
Make sure that the cooktop and cooktop extractor are
switched off (see Operating chapter).
Wait until the fan display is
0
.
8.4 Cleaning the cooktop extractor
The air inlet nozzle and the stainless steel grease filter
absorb the greasy components of the kitchen vapour.
Make sure that the cooktop and cooktop extractor are
switched off (see Operating chapter).
Wait until the fan display is 0.
Clean the cooktop extractor in accordance with the
cleaning cycles (see Tab. 7.1).
Clean the surfaces of the exhaust air system using a
soft damp cloth, detergent or a mild window cleaning
agent.
Soften dried-on dirt residues using a damp cloth
(do not scratch!).
8.4.1 Removing the air inlet nozzle and
stainless steel grease filter
1
2
Fig. 8.1 Removing the air inlet nozzle
[1] Air inlet nozzle
[2] Access opening
Prerequisite: The fan level indicator indicates
0
.
Reach into the access opening [2] with your hand.
Remove the air inlet nozzle [1] out upwards.
3
2
1
Fig. 8.2 Removing the stainless steel grease lter
[1] Stainless steel grease filter
[2] Handle
[3] Suction opening
Grab the stainless steel grease filter using the
handle [2].
Pull the stainless steel grease filter [1] out of the
suction opening [3] upwards.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora BFIAS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora BFIAS in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora BFIAS

Bora BFIAS User Manual - German - 52 pages

Bora BFIAS User Manual - Dutch - 52 pages

Bora BFIAS User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info