714526
30
Zoom out
Zoom in
Previous page
1/48
Next page
EN
30
Installation
www.bora.com
6.9 Device power management
(overall power reduction)
INFO
The device power management function can be set
in the service menu. Accessing the service menu and
changing the power management setting may only be
performed by a certified specialist.
The total device power can be reduced to 4.4 kW upon
initial commissioning if the required electrical power
cannot be provided at the installation site.
The connection must always be equipped with 20 A fuse
protection as a minimum.
Programming the device power management
Prerequisites:
The cooktop is switched off.
All cooking zones are switched off.
Separate the device from the voltage supply using the LS
switch, fuses, automatic circuit breakers or contactors.
After re-establishing the voltage supply, you have up to
two minutes to open the service menu.
Re-connect the appliance to the voltage supply.
Press and hold the multi-function button.
Briefly press the timer button.
A short signal tone will sound and the front half of the
setting ring lights up.
Now release the multi-function button.
Swipe the setting ring in a circular, clockwise motion
to move from 3 to 8.
0
3
8
Fig. 6.40 Opening the service menu
C0
is displayed intermittently with
C
and
O
on the left
front cooking zone indicator.
0
is displayed in the left back cooking zone indicator
(factory setting).
Use the multi-function button to select the menu level
C0
.
Press any key at the adjusting ring to change the
setting of the back left cooking zone from
0
to
1
.
Press the timer button to save the change.
The cooktop is ready for use.
1
L1 L3
2 3 4
N PE
220 - 240 V~
220 - 240 V~
Fig. 6.37 Connection diagram 2-phase connection
1
L1
2 3 4
N PE
220 - 240 V~
Fig. 6.38 Connection diagram 1-phase connection
4
4
1
1
3
2
Fig. 6.39 Electrical connections of the cooktop
[1] Bore holes
[2] Power supply
[3] Connection control
[4] Cable mounting clip
Connect the power supply cable to the power supply [2]
of the cooktop with cooktopFig. 6.36r in accordance
with the relevant connection diagram (see fig. 6.36
Connection diagram).
For a 1-phase or 2-phase connection, connect the
relevant contacts with the BKAS connector clip
(in scope of delivery).
Fasten the cable mounting clips [3] to the designated
bore holes [1] either on the left or right hand side for
the cable routing to the rear.
Ensure that the cable is not caught or damaged and is
not able to touch any hot hobs.
Verify that the installation was done correctly.
Switch on the main switch/automatic circuit breaker.
Put the cooktop into operation (see the Operation
chapter).
Check all the functions are working correctly.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora BFIAS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora BFIAS in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora BFIAS

Bora BFIAS User Manual - German - 52 pages

Bora BFIAS User Manual - Dutch - 52 pages

Bora BFIAS User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info