775461

Bontrager Node Manual

48
Zoom out
Zoom in
Previous page
1/51
Next page
To Install the Cadence Magnet
Remove the left pedal.
Slide the cadence magnet (Figure 30) onto the crankarm with the magnet
to the inside.
Reinstall the pedal.
Align the magnet with the cadence sensor.
1.
2.
3.
4.
Figure 30. Crank Magnet on Crank Arm.
Figure 32. DuoTrap Sensor in Chainstay. Figure 33. Zip-tie.
To Install the Sensor(s)
Certain Trek and Gary Fisher road bikes feature a specially designed pocket
that allows you to integrate a SpeedTrap sensor directly into the fork leg or a
DuoTrap (Figure 32) sensor directly into the chainstay. If installing a SpeedTrap
or DuoTrap sensor (both sold separately), please refer to the installation
instructions included with the sensor.
For non-SpeedTrap or DuoTrap compatible bikes:
Position the sensor on the fork leg (Figure 31) or chainstay to achieve
the correct alignment with the magnet (Figure 28). If needed, move the
magnet.
When you have achieved the correct alignment, pass a zip-tie through the
sensor and around the fork blade or chainstay (Figure 33).
Install a second zip-tie.
Re-check the alignment of the sensor, and tighten both zip-ties.
Using a pair of scissors, cut off the excess length of zip-tie.
1.
2.
3.
4.
5.
Figure 31. Speed Sensor on Fork.
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bontrager Node at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bontrager Node in the language / languages: English as an attachment in your email.

The manual is 4.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bontrager Node

Bontrager Node User Manual - English - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info