Manual Boneco U7144 (page 20 of 136) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish)

507530

Zoom out

Zoom in

1/136

few seconds.

C) Timer

Using button C, the operation time can be set - adjustable

between 1 and 8 hours, or continuous operation. Letter G

shows the operating period that has been set (1h/2h/3h/

4h/5h/6h/7h/8h). The display will automatically show the

current value after a few seconds.

D) Controlling mist output and Evaporator

output

By repeatedly pressing button D you can control the mist

output. The LO/ME/HI display (H) shows which of the three

levels (low/medium/high) you have selected.

E) Operation with pre-heating

Button E is used for switching the pre-heating on and off

(letter I lights up). As a result, the water is pre-heated to a

temperature of 80 °C before entering the nebuliser space.

It takes approx. 10 to 15 minutes for the water in the base

to warm up. The mist now leaves the nebuliser space at a

pleasant temperature of 40 °C. The advantage of this is

that the room temperature does not drop and, in addition,

it significantly improves the water quality maintenance

(bacteria are killed).

F) Auto/Sleep

The automatic and sleep modes can be activated by pres-

sing button F. By pressing the button once, the automatic

function is switched on (letter J appears on the display),

maintaining the optimum humidity subject to the tempera-

ture. Control takes place by means of output quantity and

pre-set target value. If the sleep function is switched on

(the letter K appears on the display), the target humidity is

60%; the operation time is automatically set at 6 hours; the

heating is switched on. In addition, the output quantity is

also controlled subject to the difference between the target

value and the actual value.

The Timer cannot be changed in either mode. If other but-

A) Switching on/off

You can switch the unit on or off by pressing button A. This

button is also used to reset the cleaning indicator light (by

holding down).

B) Hygrostat (pre-set moisture level)

By pressing button B you can set the desired moisture level

in %. A relative moisture of between 40 and 60% is recom-

mended. The accuracy of measurement is +/- 5%. The unit

will switch off when the moisture level exceeds the desired

setting. During selection the target value is displayed. The

display will automatically show the current value after a

Operation U7144 tons are pressed, the unit will no longer be in auto or sleep

mode.

L) Empty indicator

The transparent water tank makes it possible to see the

water level well. Furthermore, the unit shows on the display

(L) when water should be added.

Please read the chapter «Filling the tank» for more informa-

tion. The symbol L may stay illuminated for some seconds

with a refilled tank until the base is filled with water.

M) Cleaning indicator

If symbol M and «CLEAN» appear on the display, the appli-

ance should be cleaned as recommended by the manufac-

turer. This symbol comes on automatically every 2 weeks,

depending on the level of use. The display can be cancelled

by depressing button A for between 10 and 15 seconds.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boneco U7144 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 20,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boneco U7144 Manual

Product: