350352
4
Zoom out
Zoom in
Previous page
1/28
Next page
UK - 3 -
Installation and Switching On The Appliance
This appliance is connecting to 220-240V and 50 Hz.
You can offer help from the service to install and switching on the appliance without
any cost.
Before making the connection to the power supply, ensure that the voltage on the
nameplate corresponds to the voltage of electrical system in your home.
If the socket does not match the refrigerator plug, replace the plug with a suitable
one (at least 16 A)
Insert the plug into a socket with an efficient ground connection. If the socket has no
ground contact, we suggest you call an electrician for assistance.
Manufacturer is not responsible for failure to complete the ground connection as
described in this booklet.
Do not place the appliance in direct sunlight.
Do not use in open air and shall not be exposed to the rain.
Place the refrigerator far from heat sources and in a well-venti-
lated position. The refrigerator should be at least 50 cm from
radiators, gas or coal stoves and 5 cm far from electrical stoves.
Keep the top free for at least 15 cm.
Do not place heavy and lots of things on the appliance.
If the appliance is installed next to another refrigerator or freezer,
observe a minimum distance of 2 cm to prevent condensation.
The appliance must be stand firmly and level on the floor Use
the two front levelling-feet to compensate for an even floor.
In order to have air circulation under the appliance, the space
under the appliance must be open. Don’t close it with carpet ,
etc.
The outside of the appliance and the accessories inside should
be cleaned with a solution of water and liquid soap; the inside
of the appliance with sodium bicarbonate dissolved in lukewarm
water. After drying replace all the accessories.
Before Switching On
Wait after 3 hours before plugging the appliance in to the main power
to ensure proper performance.
There can be an odour when you first switch on the appliance. It will
disappear after the appliance starts to cool.
PDF created with pdfFactory Pro trial version www.pdffactory.com
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bompani bo 06856 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bompani bo 06856 in the language / languages: English, Italian as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info