688015

Bomann WT 5023 Manual

10
Zoom out
Zoom in
Previous page
1/16
Next page
10
Automatic drying programs
Automatic drying programsAutomatic drying programs
Automatic drying programs
The appliance detects the moisture in the load and
automatically adjusts the optimum drying time. The
electronic control ensures the best drying results
even at less loading of the dryer. It is activated in all
programs, except in the time controlled program
[30-40-50-60 MIN].
Capacity
CapacityCapacity
Capacity
Do not overload the appliance, otherwise the fabrics
will become stretched and drying will be impaired.
Refer to the information in the "Program table".
Starting
Starting Starting
Starting the
thethe
the
program
programprogram
program
• Connect the appliance to the power supply.
• Put the washing into the drum.
• Switch the appliance on.
• Select the required operating conditions.
• Start the drying operation.
Program change
Program changeProgram change
Program change
A change is not possible after a successful startup.
To select a new program, you must switch the appli-
ance off and on again.
End of program
End of programEnd of program
End of program
At the end of the drying cycle will sound a series of
signals (unless you have muted them); the control
panel goes into standby mode and the appliance
starts an automatic anti-crease cycle.
Automatic anti
Automatic antiAutomatic anti
Automatic anti-
--
-crease cycle
crease cyclecrease cycle
crease cycle
If you do not remove the clothes from the appliance
after the drying process has finished, the appliance
will start the automatic anti-crease cycle of approx.
30 minutes (the anti-crease control lamp is flashing).
The appliance continues rotating the drum in inter-
vals in order to prevent textiles from creasing. At the
end of that cycle the appliance will stop operating
completely. During the process you can remove the
washing at any time.
Switch off
Switch offSwitch off
Switch off
• Switch the appliance off.
• Clean the lint filter as described under “Cleaning
and Maintenance”.
• Leave the appliance door slightly open until the
next dry cycle to avoid odors.
• If the appliance is not in use for an extended time:
-
disconnect it from the power supply!
Energy saving tips
Energy saving tipsEnergy saving tips
Energy saving tips
• Take advantage of the maximum capacity of each
dry program.
• Select the dry program depending on the type of
laundry and the required degree of dryness.
• Dry the laundry not excessively. This protects
your laundry, prevents wrinkling and save energy.
• Clean the filter regularly to avoid excessive drying
and high energy consumption.
• Ventilate the room well. The room temperature
should not rise above 35°C.
Cleaning and
Cleaning and Cleaning and
Cleaning and Maintenance
MaintenanceMaintenance
Maintenance
WAR
WARWAR
WARNING
NINGNING
NING:
::
:
• Always switch off the appliance and disconnect it
from the power supply before cleaning and user
maintenance.
• Allow the appliance to cool down sufficient before
cleaning.
• Do not use steam cleaners for cleaning the appli-
ance; moisture could enter electrical components.
Risk of electric shock!
Risk of electric shock!Risk of electric shock!
Risk of electric shock! Hot steam could damage
the plastic parts. The appliance must be dry be-
fore restarting operation.
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
• Do not use a wire brush or other sharp, abrasive
items.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann WT 5023 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann WT 5023 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann WT 5023

Bomann WT 5023 User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info