651932
6
Zoom out
Zoom in
Previous page
1/16
Next page
6
WAR
WARWAR
WARNING
NINGNING
NING:
::
:
It is not allowed to modify the plug provided with
the appliance. If the plug does not fit properly to
the outlet, let install a proper outlet by an author-
ized specialist.
The accessibility of the power plug must always
be ensured in order to disconnect the appliance
from the power supply in case of an emergency.
Ensure that your mains power corresponds with
the specifications of the appliance. The specifica-
tions are printed on the rating label.
Connect the mains cable to a properly installed
and earthed wall outlet.
When using extension cords, they should have a
wire cross section of 1.5 mm².
If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
Startup / Operation
Startup / OperationStartup / Operation
Startup / Operation
Prior using for the first time
Prior using for the first timePrior using for the first time
Prior using for the first time
CAUTION:
CAUTION:CAUTION:
CAUTION:
After transporting the appliance should be left stand-
ing for about 2 hours, so that the coolant can collect
in the compressor.
Remove the accessories and other materials from
the appliance drum.
Clean the appliance drum. Follow the instructions
which we provide in the chapter “Cleaning and
Maintenance”.
Allow the appliance to dry the first time for about
30 minutes with old, damp clothes (see “Starting
the program”).
Drying advice
Drying adviceDrying advice
Drying advice
CA
CACA
CAUTION: Do NOT dry in the appliance!
UTION: Do NOT dry in the appliance!UTION: Do NOT dry in the appliance!
UTION: Do NOT dry in the appliance!
Fabrics which are not tumble-dryer safe. Always follow the instructions on the
care labels of your fabrics.
Washing that has not been washed.
Washing stained with cooking oil, acetone, alcohol, fuel, petrol, kerosene, stain
remover, turpentine, wax, or wax remover. This must be washed first in the wash-
ing machine with hot water and detergent before drying.
Objects such as foam rubber (latex), shower caps, waterproof fabrics, rubberised
items, and items of clothing or pillows with foam rubber flakes.
Softeners or similar products should be used as specified in the softener instruc-
tions.
The last section of the drying cycle is done without heat (cool down cycle) to en-
sure that the items of washing remain at a temperature which does not lead to the
washing being damaged.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann WPT 5021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann WPT 5021 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann WPT 5021

Bomann WPT 5021 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info