688007
29
Zoom out
Zoom in
Previous page
1/56
Next page
29
CAUTION:
Do not immerse the device into water for cleaning.
Please follow the instructions as stipulated in the chapter “Cleaning”.
Instructions
Preparation
Before using for the rst time, boil fresh water at least three
times in the appliance. Use only water without any additives or
ingredients.
Electrical connection
Check whether the electrical voltage that you intend to use is
the same as that of the machine. Details are to be found on the
label on the base.
CAUTION:Overload!
Do not use any multiple sockets, as this device is too power-
ful.
Switching on/off
Switching on: Press the toggle switch downwards. The indica-
tor light in the switch lights up.
Switching off: Press the toggle switch upwards. The indicator
light in the switch goes off.
Use
NOTE:
Always use fresh water.
Do not consume the water if it has been in the kettle for
more than one hour.
Also do not constantly reheat cooled water.
Always pour out stagnant water.
1. Place the machine on a at surface.
2. Press the button in the handle to open the kettle.
3. Then ll in the water (max 1.0 Litre). You can read the lling
level on the water level indicator of the kettle.
4. Close the lid.
5. Place the kettle ush on the base.
6. Only connect the machine to a properly installed safety
socket.
7. Switch on the kettle by pressing the switch. The control
lamp in the switch will light up.
Pausing/terminatingoperation
There are two options to interrupt the boiling process or to
terminate it:
The appliance will shut off automatically after the boiling
process. The indicator lamp will go out.
Set the switch to the “0” position to pause or terminate the
boiling process.
WARNING:
Do not remove the appliance from the base without shut-
ting it off rst. As long as the switch is in the “I” position,
the kettle will stay turned on.
Always shut off the appliance before removing it from the
base! Also ensure that it is turned off when you set it back
onto the base!
WARNING:Dangerofscalding!
When pouring the water out, keep the lid closed.
During operation the housing becomes hot. Do not touch
it and allow the device to cool down before storing it
away.
Disconnect the power cord.
Emptying the water container.
Cleaning
WARNING:
Always turn the device off before cleaning it and remove the mains
plug. Wait until the device has cooled down.
Never immerse the device or the base in water or other liquids.
CAUTION
Do not use any wire brush or other abrasive objects.
Do not use any acidic or abrasive detergents.
Rinse the water container out with clean water. Then dry it
off with a cloth.
Clean the housing after use with a slightly damp cloth.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann WK 5024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann WK 5024 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info