Manual Bomann Wk 1532 cB (page 22 of 36) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

483421

Zoom out

Zoom in

1/36





1. Place the machine on a at surface.

2. Open the kettle by rst pressing the catch in the lid in the

direction of the arrow and then pulling the lead upwards.

Then ll in the water. Please only ll up to the maximum

(MAX) mark. You can read the lling level on the water level

indicator of the kettle.

3. Close the lid until you hear it lock in place.

4. Place the kettle ush on the base.

5.  

•Check whether the electrical voltage that you intend to

use is the same as that of the machine. Details are to be

found on the label on the base.

•Only connect the machine to a properly installed 230 V,

50 Hz safety socket.

6. Switch on the kettle by pressing the switch. To control lamp

lights up.

7. After boiling has nished the kettle switches off automati-

cally, or you can push the switch upwards to interrupt or stop

the boiling process.



•If you remove the device from the base without pushing

the switch up beforehand, the kettle remains switched on.

Always switch the device off before you remove it from the

base! Please also ensure that it is switched off when you

put it back on the base.

   

•When pouring the water out, keep the lid closed.

•During operation the housing becomes hot. Do not touch it

and allow the device to cool down before storing it away.

 

•If you would like to turn the kettle off, push the switch

upwards and remove the plug from the socket.

•The control lamp goes off.

•Emptying the water container.

   

The mains cable can be wound up on the base.





•Always turn the device off before cleaning it and remove

the mains plug. Wait until the device has cooled down.

•Never immerse the device or the base in water or other

liquids.



•Do not use any wire brush or other abrasive objects.

•Do not use any acidic or abrasive detergents.

•Rinse the water container out with clean water. Then dry it

off with a cloth.

•Clean the housing after use with a slightly damp cloth.

•There is a permanent lter in the spout. In order to clean the

lter, pull it out with the lid open. Rinse out the lter with run-

ning water. Reinsert it, taking note of the guide mechanism.



•The frequency of the decalcifying operation depends on the

hardness of the water and on how often the appliance is

used.

•If the machine switches off before the water boils, it probably

needs to be decalcied.

•Please do not use vinegar but a commercially available

decalcication agent on the basis of citric acid. Only use the

quantities stated in the instructions.



After descaling the device boil fresh water in it several times

(approximately 3-4 times) in order to remove any residues. Do

 consume this water.



•         

Possible Cause:

After being used without or with too little water the machine

has not cooled down sufciently.

Remedy:

Allow the machine to cool down for 15 min.

•         

Possible Cause:

The heating element is covered in scale or the electrical

circuit of the power socket is overloaded.

Remedy:

Descale the machine as instructed.

Check the mains connection.

•      

Possible Cause:

The lid is not closed or the lter is not inserted.

Remedy:

Close the lid until it locks in place or re-insert the lter.

•          



Possible Cause:

The switch is turned on.

Remedy:

Press the switch upwards.

BO_BDA_WK_1532_1.indd 22 19.07.2010 12:45:45 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann Wk 1532 cB in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann Wk 1532 cB Manual

Product: