814361
27
Zoom out
Zoom in
Previous page
1/44
Next page
27
NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter
“Cleaning and Maintenance”
.
Appliance equipment
Appliance overview
1
Control panel
2
Appliance door
3
Maintenance cover
4
Feet
5
Detergent dispenser
Delivery scope
1x inlet hose, 1x hose retaining bend, 4x transport
locking covers, 1x wrench
Installation
WARNING:
The unit must not be connected to the mains during
installing. Otherwise, there is danger to life or electric
shock hazard!
CAUTION:
For a correct operation the appliance must be con-
nected properly. The specifications for water supply
and drain as well as the electrical connection must
fulfill the required criteria.
Remove the transport locking screws
CAUTION:
Before using, all transport locking screws must be
removed from the appliance back. Otherwise, it
may cause serious damages.
Keep the transport locking screws for later use /
transport. Never transport the appliance without
properly attached transportation safety!
Unscrew the four transport bolts by approx.
30 mm using the supplied wrench.
Press the bolts respectively inwards and loosen.
Remove the four transport bolts to the front.
Insert the enclosed cover caps.
Before further transport: Reinsert the transport
bolts in reverse order.
Installation location
The site should be located near the water inlet
and outlet, as well as near a properly grounded
power socket.
Good ventilation around the appliance is required,
to dissipate the heat properly. Enough clearance
must be created for this purpose.
The free space in front of the unit should be so
that the appliance door can be opened without
hindrance.
Make sure that the floor on which the appliance is
installed, is even, heat-resistant and clean.
Take care of a solid and horizontal position of the
appliance. If the appliance is not horizontally lev-
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann WA 7174 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann WA 7174 in the language / languages: English, German as an attachment in your email.

The manual is 1.46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info