688011
8
Zoom out
Zoom in
Previous page
1/28
Next page
8
Take care of
a solid and horizontal position of the appliance. If the appliance is not
horizontally leveled, adjust the feet accordingly (see “Adjust the feet”).
Power cord and water hoses may not kinked or squashed.
The wall socket must be freely accessible.
Avoid
Avoid Avoid
Avoid the installation:
the installation:the installation:
the installation:
-
near heaters, next to a stove, direct sunlight or any other heat sources;
-
at locations with high humidity (e.g. outdoors), as metal parts would be su
ceptible to corrosion under such circumstances;
- in rooms where the temperature could dro
p below freezing. Do not expose
the appliance any weather.
-
near volatile or flammable materials (e.g. gas, fuel, alcohol, paint, etc.).
Adjust the feet
Adjust the feetAdjust the feet
Adjust the feet
CAUTION:
CAUTION:CAUTION:
CAUTION:
The feet must never be removed. Do not restrict the floor clearance through carpets,
strips of wood or similar. Danger of heat accumulation!
Danger of heat accumulation!Danger of heat accumulation!
Danger of heat accumulation!
Use the wrench to loosen the lock nuts.
Rotate the feet to change the height. Tighten the lock nuts with the
wrench, if the unit is aligned. The feet must have solid ground contact.
Check with a spirit level whether the appliance is leveled horizontally. If
the unit is not in balance, the feet must be adjusted again.
Water connection
Water connectionWater connection
Water connection
CAUTION:
CAUTION:CAUTION:
CAUTION:
The
Installation of the water supply must conform to the local laws and regulations.
The appliance is not
notnot
not suitable for hot water supply.
Use the new supplied hose set to connect the appliance to the water supply. Do not
reuse old or used connection sets.
If
the water pipe is new or long time not used, ensure before connecting to the
water system, that the water is clear and free from contamination.
a solid and horizontal position of the appliance. If the appliance is not
horizontally leveled, adjust the feet accordingly (see “Adjust the feet”).
near heaters, next to a stove, direct sunlight or any other heat sources;
at locations with high humidity (e.g. outdoors), as metal parts would be su
s-
p below freezing. Do not expose
near volatile or flammable materials (e.g. gas, fuel, alcohol, paint, etc.).
The feet must never be removed. Do not restrict the floor clearance through carpets,
Rotate the feet to change the height. Tighten the lock nuts with the
wrench, if the unit is aligned. The feet must have solid ground contact.
Check with a spirit level whether the appliance is leveled horizontally. If
the unit is not in balance, the feet must be adjusted again.
Installation of the water supply must conform to the local laws and regulations.
Use the new supplied hose set to connect the appliance to the water supply. Do not
the water pipe is new or long time not used, ensure before connecting to the
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann WA 5729 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann WA 5729 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann WA 5729

Bomann WA 5729 User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info