17
After program start you can add or remove laundry if necessary. Stop the washing
process with the START/PAUSE button. The appliance checks whether it is possible to
refit and releases the door lock after a short time.
As soon as the water temperature or the water level exceeds a certain value, the door
remains locked for safety reasons and a reloading is not possible.
Changing the program
Changing the programChanging the program
Changing the program
• First interrupt the washing process with the START/PAUSE button.
• To make a program change, switch off the unit for a short time.
• Switch the unit on again, select the desired program and start the new operation.
End of program
End of programEnd of program
End of program
At the end of the wash cycle several beeps are sounded; a few minutes later, the unit
goes into standby mode. The door lock will be unlocked.
Switch
SwitchSwitch
Switching
inging
ing
off
offoff
off
• Switch off the appliance.
• Close the water supply!
• Leave the appliance door slightly open until the next wash cycle to avoid odors.
• If the appliance is not in use for an extended period, disconnect the mains plug or
switch off or turn out the fuse.
Energy saving tips
Energy saving tipsEnergy saving tips
Energy saving tips
• If possible avoid the selection of high wash temperatures. Modern detergents
achieve good washing results even at low temperatures.
• Select the wash program depending on the type of laundry and the required degree
of washing.
• Take advantage of the maximum capacity of each wash program.
• Clean the filter regularly to avoid excessive washing and high energy consumption.
• Ventilate the room well. The room temperature should not rise above +35°C.
