688008
9
Zoom out
Zoom in
Previous page
1/28
Next page
9
Notes on inlet hose safety system (
Notes on inlet hose safety system (Notes on inlet hose safety system (
Notes on inlet hose safety system (
delivery scope depending on model
delivery scope depending on modeldelivery scope depending on model
delivery scope depending on model
The safety system consists of a double-walled inlet hose. It
guarantees to cut off the
water supply when leakage of the inner hose. Switching off the water supply leads over
an electronic contact.
If necessary, you can order an inlet hose safety system from your
dealer or in our online
accessories shop, www.bomann
www.bomannwww.bomann
www.bomann-
--
-germarny.de
germarny.degermarny.de
germarny.de
. To order, use the reference number
found under “Technical Data”.
Connect the water inlet hose (cold water connection)
Connect the water inlet hose (cold water connection)Connect the water inlet hose (cold water connection)
Connect the water inlet hose (cold water connection)
NOTE
NOTENOTE
NOTE:
::
:
The
water pressure must be between 0.03 MPa and 1.0 MPa. With higher
use a pressure regulator.
Check the tightness of the rubber seals (d) at both ends of the inlet
hose to prevent leakage.
Connect the water inlet hose to a water thread with ¾“.
hose firmly in the direction of the screw thread; pay attention for a
tight fit.
Connect the other end of the inlet hose to the inlet valve on the
appliance back; pay attention for a tight fit too.
Connect the water drain hose
Connect the water drain hoseConnect the water drain hose
Connect the water drain hose
NOTE
NOTENOTE
NOTE:
::
:
The drain hose has a length of approx. 1.5 m and can extend with a suitable hose and
connecting piece to a length of max. 4 m.
CAUTION:
CAUTION:CAUTION:
CAUTION:
In order to prevent backflow of contaminated water, the free end of
the hose must not
come under the water level of the drain.
Connect the drain hose to a drain pipe with a minimum diameter of 40 mm; altern
tively the drain hose can be fixed to a sink or directly to the drainage.
delivery scope depending on model
delivery scope depending on modeldelivery scope depending on model
delivery scope depending on model
)
))
)
guarantees to cut off the
water supply when leakage of the inner hose. Switching off the water supply leads over
dealer or in our online
. To order, use the reference number
water pressure must be between 0.03 MPa and 1.0 MPa. With higher
pressure:
Check the tightness of the rubber seals (d) at both ends of the inlet
Connect the water inlet hose to a water thread with ¾“.
Screw the
hose firmly in the direction of the screw thread; pay attention for a
Connect the other end of the inlet hose to the inlet valve on the
The drain hose has a length of approx. 1.5 m and can extend with a suitable hose and
the hose must not
Connect the drain hose to a drain pipe with a minimum diameter of 40 mm; altern
a-
tively the drain hose can be fixed to a sink or directly to the drainage.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann WA 5721 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann WA 5721 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann WA 5721

Bomann WA 5721 User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info