Manual Bomann VS 7316.1 (page 25 of 32) (English, German)

814324

Zoom out

Zoom in

1/32

temperatures, the compressor will run more fre-

quently and longer.

• Ensure enough ventilation at the bottom and rear

side. Never block ventilation openings.

• Place all shelves, racks or drawers (depending on

the model) in their original position.

• Adjust the temperature not colder than necessary.

• Allow warm food to cool before placing it in the

appliance.

• Open the appliance door only as necessary.

• Defrost the unit regularly (model dependent).

• The seal of the appliance door must be complete-

ly intact, so that the door closes properly.

Cleaning and maintenance

WARNING:

• Always disconnect the appliance from the power

supply before cleaning and user maintenance.

• Do not use steam cleaners for cleaning the appli-

ance; moisture could enter electrical components.

Risk of electric shock! Hot steam could damage

the plastic parts.

• The unit must be dry before restarting operation.

CAUTION:

• Do not use a wire brush or other sharp, abrasive

items.

• Do not use any acidic or abrasive detergents.

• Do not damage the refrigerant circuit.

Cleaning the appliance including interior

To keep dirt and germs at bay, clean the appliance

regularly!

• First clear out the contents of the appliance and

store it in a cool place. Remove all moving parts

such as shelves or drawers.

• Clean the interior of the appliance, the exterior

surfaces and the accessories with lukewarm wa-

ter and a mild cleaning agent; or with a clean,

damp microfiber cloth without cleaning agent.

• Clean the thaw water discharge channel / opening

carefully e.g. with a pipe cleaner.

• After everything has dried thoroughly, you can put

the appliance back into operation.

•

Depending on the model:

At least once a year,

wipe off the dust that has accumulated on the rear

wall of the unit and on the condenser (metal

grille). Use a soft brush or a vacuum cleaner for

this purpose.

Cleaning / replacing the door seal

Regularly check the seal for dirt, damage and air

tightness!

Checking the seal for air tightness

• Clamp a thin piece of paper at various points for

testing. The paper must be equally difficult to pull

through at all points.

Cleaning the gasket

• Clean the gasket with clear water only!

• CAUTION, grease and oil makes the seal porous

and brittle. Wipe up grease or oil immediately with

a damp, clean cloth.

Replacing the seal

• Remove the contents of the appliance and, if

necessary, defrost the unit. Pay attention to how

the old gasket is attached. Most gaskets are only

plugged in.

• Remove the worn gasket rubber by removing it

from the groove. Carefully clean the appliance

door and the groove below the rubber and re-

move any adhesive residue.

• Attach the new rubber. If necessary, heat the

rubber seal with a hair dryer or hot water and

shape it by hand. Start pressing the gasket in one

corner and then press it around the door into the

groove provided for this purpose.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann VS 7316.1 in the language / languages: English, German as an attachment in your email.

The manual is 1.08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann VS 7316.1 Manual

Product: