552135

Bomann VS 262 Manual

5
Zoom out
Zoom in
Previous page
1/10
Next page
5
03/2014
Only insert the plug into an electrical socket which is earthed properly. If the electrical socket to
which the appliance must be connected is not appropriate for the plug, let replace the socket by a
specialist, rather than using a adaptors or the like as they could cause overheating and burns.
Grounding Instructions
This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the
risk of electric shock by providing a path of least resistance for the electric current. This appliance is
equipped with a cord having an equipment-earthing conductor and an earthing plug. The plug must be
plugged into an appropriate outlet that is installed and earthed in accordance with all local standards
and requirements.
WARNING:
- Improper connection of the equipment earthing conductor can result in the risk of an electric shock.
- Check with a qualified electrician if you are in doubt whether the appliance is properly earthed.
- Do not modify the plug provided with the appliance. If the plug does not fit properly to the outlet,
please have a qualified electrician to install a proper outlet.
- If power cord is damaged or has any sign of being broken, special power cord must be selected or
purchased from its manufacturer or service for replacement.
- Protect the mains cable. Ensure that it does not turn into a trip hazard. The wall outlet must be
freely accessible at all times.
- Do not overload the wall outlet; do not use an extension cable. Overloaded cables can cause fire
and electric shock.
- Do not touch the plug with wet hands..
R
EVERSE
T
HE
D
OOR
O
PENING
If required, the door opening can be moved from the right (supplied condition) to the left side.
WARNING
When replacing the door stop, the device must be disconnected
from the power supply. Always unplug the device first.
1. Use a small flat screwdriver to lift up the two screw covers
(1) on the top cover (3).
2. Use a cross screwdriver to remove the two screws (2) on the
top cover and the other two screws (11) on the backside of
top cover.
3. Lift up the top cover (3) and pull out the door hinge pin (4)
from the door, and put them on a safety place for later use.
Lift up the door (6) and put it on a safety place for later use.
4. Remove the left adjustable foot (7) and the right adjustable
foot (8) and screws (9) and keep them for later use.
5. Move the lower hinge (10) from the right side to the left side,
then fix it with the screws (9). Then install the right adjustable
foot (8) on the left and the left adjustable foot (7) on the right.
6. According to the reversible way of above procedure to install
the door (6), then put the door hinge pin (4) into the left hole
of the door, then put the top cover (3) on it, please make sure the door hinge pin (4) to be placed
into the hole of the top cover (3), then use the cross screw drive to fix the screws (2) and the
screws (11), finally put the screw covers (1) on it.
Check if the door is arranged vertical as well as horizontal, so that a smooth opening and closing of
door is ensured.
S
TARTUP
/
O
PERATION
Prior to First Use
ATTENTION: After transport, the device should be left standing for 4 hours in order for the oil to
be collected in the compressor.
Nonobservance could cause damage to the compressor and hence
result in failure of the device. This would void your warranty claim.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann VS 262 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann VS 262 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann VS 262

Bomann VS 262 User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info