814322
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter
“Cleaning and maintenance”
.
Appliance equipment
Appliance overview
1
Temperature control /
interior light
2
Glass shelves
3
Vegetable box
4
Feet
5
Door storage racks
Delivery scope
3x glass shelf, 1x vegetable box, 3x door storage
rack, 2x egg tray, 1x rubber supporting pad
Installation
Conditions for the installation location
Good ventilation is required around the appliance
to dissipate the heat properly and to guarantee ef-
ficient cooling operation at low power consump-
tion. Enough clearance is necessary.
- Gap to the back approx. 5070 mm, to the
side walls and above the appliance each ap-
prox. min. 100 mm;
- Place the appliance so that the appliance door
can open without being impeded.
Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
The climate class can be found under
"Technical
data"
and on the rating label located in the interior
or on the appliance rear.
Place the appliance on a steady and safe surface.
If the appliance is not horizontally leveled, adjust
the feet accordingly.
Avoid the installation:
- near heaters, next to a stove, direct sunlight or
any other heat sources;
- at locations with high humidity (e. g. outdoors,
bathroom), as metal parts would be suscepti-
ble to corrosion under such circumstances;
- near volatile or flammable materials (e. g. gas,
fuel, alcohol, paint, etc.), in rooms which may
have poor air circulation (e. g. garages).
- Do not expose the appliance any weather.
Assembling the rubber supporting pad
CAUTION:
Under extreme circumstances, there is a risk that the
appliance may tilt forward.
NOTE:
Installation of the rubber supporting pad is ONLY
necessary if the interior is empty and the refrigerator
door is loaded with 15 kg or more.
Tilt the appliance slightly back and block it in this po-
sition. Use the delivered screw to secure the
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann VS 2185.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann VS 2185.1 in the language / languages: English, German as an attachment in your email.

The manual is 0.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info