Manual Bomann UM 1374 CB (page 32 of 54) (English, German, Dutch, French, Italian, Polish, Spanish)

814443

Zoom out

Zoom in

1/54

UM1374CB_IM_new 09.05.17

Installation

Mixing Vessel

Set the mixing vessel inclined onto the motor

housing and turn it in clockwise direction to

tighten it (refer to the illustration). The mixing

vessel can be set in 4 positions.

Lid

1. Press the lid rmly onto the mixing vessel. It must seal the

mixing vessel completely.

2. Insert the cap into the rell opening of the lid. Tighten the

cap by turning it clockwise.

NOTE:

The rell opening cap can also be used as a measuring cup.

Notes on Use

CAUTION:

The glass may crack if the temperature is too high! DO

NOT ll with liquids above 60 °C.

• Place the device on a rm and at surface. Position it is

such that it cannot tip over.

• Only switch on the appliance if the mixing vessel is closed

with the lid. The rell opening in the lid must also be

closed.

• Do not overll the mixing vessel! You can ll it to a maxi-

mum of 1.5 liters. Use the scale on the jug.

• Froth requires a large capacity. Reduce quantities of

liquids which produce a lot of froth.

• Keep one hand on the lid if you are crushing ice or if there

is a large quantity of ingredients.

• Cut the food to be mixed into small pieces beforehand.

Electric Connection

• Before inserting the power plug into the outlet, check that

the mains voltage to be used matches that of the device.

You can nd the required information on the nameplate.

• Connect the device only to a correctly installed safety

socket.

Short-interval Use

The appliance is suitable for short-time operation of max.

3 minutes. Let it cool for 1 minute before using it again!

Pulse Mode

Switch to pulse mode by turning the control to the “P” position

and then release it. Use the appliance in this operating mode

for a maximum of 3 minutes.

Let it cool for 1 minute before

using it again!

Crushing Ice Cubes

The blades in the mixing vessel are also suitable for crushing

ice cubes.

• Put a maximum of 10 pieces (size approx. 25 x 25 x 25 mm)

into the mixing vessel. Use pulse operation “P” for 1 - 3

seconds. Repeat the process 8 - 12 times.

• When adding uid, you can use the “2” setting for

1 - 2 minutes.

Operation

Preparation

1. Ensure that the function switch is in the “0” position.

2. Place the mixing vessel in position.

3. Now put the ingredients that are to be mixed into the

mixing vessel.

4. Put the lid on.

5. Close the rell opening with the cap.

Mixing

Operation is carried out with the setting control:

Level 0 = off

Level 1 = low rpm

Level 2 - 3 = medium speed

Level 4 = high rpm

P = High speed in pulse mode

Adding further Ingredients to be mixed

Items to be mixed or spices can be fed in through the lling

aperture.

• Please switch off the machine before doing so.

• Before you switch the device on again, close the opening.

Stopping Operation

1. Turn the switch to the “0” position.

2. Wait until the blade comes to a complete stop.

3. Remove the mains plug from the socket.

4. Remove the mixing vessel. Turn it anticlockwise.

5. Take off the lid before pouring.

IMPORTANT NOTE:

Citrus juices and food containing acids should never be

stored in metal vessels.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann UM 1374 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3.18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann UM 1374 CB Manual

Product: