Manual Bomann TSG 7404 (page 54 of 112) (English, German, Dutch, Polish, Spanish)

814369

Zoom out

Zoom in

1/112

CAUTION:

• For proper operation, the appliance must be con-

nected professionally. The data of inlet and outlet

as well as the electrical connection values must

meet the required criteria.

• It is recommended that the installation, water

connection and electrical connection, be carried

out by a specialist.

Installation location

• Place the appliance so that all controls are easily

to reach, and the appliance door can open without

being impeded.

• Take care of a solid and horizontal position of the

appliance.

• Power cord and water hoses may not kinked or

squashed.

• Avoid the installation:

- near heaters, next to a stove, direct sunlight or

any other heat sources;

- at locations with high humidity (e.g. outdoors),

as metal parts would be susceptible to corro-

sion under such circumstances;

- in rooms where the temperature could drop

below freezing. Do not expose the appliance

any weather.

- near volatile or flammable materials (e.g. gas,

fuel, alcohol, paint, etc.).

Water connection

CAUTION:

• The Installation of the water supply must conform

to the local laws and regulations.

• Use the new supplied hose set to connect the

appliance to the water supply. Do not reuse old or

used connection sets.

• If the water pipe is new or long time not used,

ensure before connecting to the water system,

that the water is clear and free from contamina-

tion.

NOTE, the connection to the water mains may only

be made in accordance with DIN EN 1717 of the

drinking water ordinance. A suitable safety device

against drinking water contamination through back-

flow must be installed.

Notes on inlet hose safety system (delivery scope

depending on model)

The safety system consists of a double-walled inlet

hose. It guarantees to cut off the water supply when

leakage of the inner hose. Switching off the water

supply leads over an electronic contact.

If necessary, you can order an inlet hose safety sys-

tem from your dealer or in our online accessories

shop, www.bomann-germarny.de. To order, use the

reference number found under

“Technical data”.

Connect the water inlet hose (cold water connection)

NOTE:

The water pressure must be between 0.04-1.0 MPa.

With higher pressure: use a pressure regulator.

• Connect the water inlet hose to a

water thread with ¾“. Screw the

hose firmly in the direction of the

screw thread; pay attention for a

tight fit.

• Connect the other end of the inlet

hose to the inlet valve on the ap-

pliance back; pay attention for a

tight fit too.

Hot water supply

The dishwasher can be supplied with a water tem-

perature of not more than 60°C. Supplying the appli-

ance with hot water, the rinse running time is short-

ened but the cleaning effect can be slightly reduced.

The connection to the hot water valve must be done

in the same manner as described for the cold water

connection.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann TSG 7404 in the language / languages: English, German, Dutch, Polish, Spanish as an attachment in your email.

The manual is 1.89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann TSG 7404 Manual

Product: