814727
25
Zoom out
Zoom in
Previous page
1/48
Next page
25
Starting-up the unit
Instructions for Use
Before you make the rst sandwiches for consumption...
Remove any packaging that is still present. Unwind the
mains lead completely.
Clean the housing and the baking surfaces with a damp
cloth.
Non-stick coating
1. Lightly grease the baking surfaces before the unit is used
for the rst time.
2. Use the appliance for about 10 minutes with the toasting
surfaces closed (see “Using the unit”).
3. Remove the mains plug from the socket and allow the
device to cool down.
4. Bake 3–4 sandwiches as a test.
NOTE:
Any smoke or smells produced during this procedure
are normal. Please ensure sufcient ventilation.
Do not eat the rst sandwich.
5. After the device has cooled down, wipe the baking surfaces
off with a paper towel.
Electrical connection
1. Check whether the mains voltage that you want to use
matches the one of the device. You will nd the information
about this on the type plate.
2. Insert the plug in a duly installed protective contact socket.
The red control lamp will light up.
Using the unit
NOTE:
Keep the baking surfaces closed while heating.
When the heating-up phase has nished, the green
control lamp goes off.
The red control lamp remains on to show that the device
is working.
1. Release the lid catch and fold the lid up until it remains
open.
2. Insert a double sandwich into each side.
3. Gently close the lid. Close the lid catch.
NOTE:
The green control lamp switches on and off during bak-
ing in order to maintain the baking temperature.
The baking time depends on your individual taste. The
longer the sandwiches remain in the device, the greater
the level of browning.
The baking section should always be closed in the
intervals between baking.
WARNING:
Pay attention to escaping steam. Risk of burning.
4. Open the lid catch carefully and then fold up the lid.
5. Remove the toasted sandwiches with a wooden fork or
similar item.
CAUTION:
Do not use pointed or sharp objects to avoid damaging the
coating of the baking surfaces.
Switching Off
If you would like to interrupt operation or switch the device off,
remove the plug from the socket. The red control lamp goes off.
CAUTION:
This device is not intended for being immersed in water during clean-
ing. Observe all instructions provided in the chapter “Cleaning”.
Cleaning
WARNING:
Always pull out the plug from the mains socket before cleaning and
wait until the unit has cooled down.
Do not immerse the device in water! It could result in an electric
shock or re.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann ST 1372 CB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann ST 1372 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info