688060
24
Zoom out
Zoom in
Previous page
1/28
Next page
24
ter valve should raise and then be removed by hand
at an angle of 45°.
Clean all parts (water tank, cover, seal ring and
water valve) using hot soapy water, then rinse thor-
oughly and dry.
The dispenser can be cleaned by running it with hot
soapy water instead of drinking water. You have to
flush the dispenser afterwards using at least 6 big
cups of clear water.
It is recommended to clean the dispenser, container,
seal ring and water valve at least once per month in
this way.
Re-installation:
Ensure that the nozzle of the water valve points
downwards and that the groove on the body of the
water valve is aligned with the groove on the
opening of the dispenser moulding. Place the water
valve in proper position by pushing it downwards at
an angle of 45° until it locks.
1 Groove 2 Nozzle
3 Opening on moulding 4 Moulding
Install the seal ring on
the bottom of the water
tank. Ensure that no
creases or wrinkles oc-
cur.
Install the water contain-
er on the door. Ensure
that the seal ring has
been inserted into the
water valve before. Hold
both sides of the water
container tightly and install the container at an angle
of 45°.
Operating noise
Operating noiseOperating noise
Operating noise
Type of sound
Type of soundType of sound
Type of sound
Cause
CauseCause
Cause
Mumbling Compressor during its operation
Liquid sounds Circulation of the refrigerant
Click sounds The temperature control turns the
compressor on or off
Disturbing
noises
Vibration of the shelves or cooling
coils
Switching
SwitchingSwitching
Switching
off
offoff
off
To switch off the appliance
To switch off the appliance To switch off the appliance
To switch off the appliance disconnect it from the
disconnect it from the disconnect it from the
disconnect it from the
power supply.
power supply.power supply.
power supply.
If the appliance is out of use for long periods:
Remove the appliance content.
Thoroughly clean the appliance (see ”Cleaning
and Maintenance”).
Leave open the appliance door to prevent un-
pleasant odours.
Tips for Energy saving
Tips for Energy savingTips for Energy saving
Tips for Energy saving
Disconnect the appliance from the power supply if
the appliance is not in use.
Do not install the appliance near stoves, heaters
or other heat sources. In case of higher ambient
temperatures, the compressor will run more fre-
quently and longer.
Ensure sufficient ventilation at the bottom and
rear side. Never block ventilation openings.
Allow warm dishes to cool down before putting
into the appliance.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann SBS 2211 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann SBS 2211 in the language / languages: English, German as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info