687788
37
Zoom out
Zoom in
Previous page
1/62
Next page
MBG6023CB_IM 19.10.18
37
Unpacking the Appliance
1. Take the appliance out of its packaging.
2. Remove all the packaging material such as plastic foil,
lling material, cable ties and cardboard packaging.
3. Check that all parts are supplied in the box.
4. In case of incomplete delivery or damage, do not operate
the appliance. Return it to your dealer immediately.
NOTE:
There may still be dust or production residues on the
appliance. We recommend to clean the appliance as
described under “Cleaning”.
Overview of the Components /
Scope of Delivery
1 Operation indicator light
2 Temperature switch
3 Function switch
4 Time / main switch
5 Heating element
6 Glass door
7 Door handle
8 Grill rack
9 Baking tray / drip pan
10 Crumb tray
11 Removal tool for grill rack and baking tray
12 Revolving spit
12a Spit forks
13 Removal tool for revolving spit
No Illustration
Pizza stone
Controls
Top Control: Temperature Switch
For convection, choose a temperature between 80 and
190 °C.
For top and bottom heat, choose a temperature between
100 and 230 °C.
Centre Controls: Function Switch
OFF Off
Top heat and bottom heat
Top heat and bottom heat with convection
Top heat with convection
Top heat with revolving spit
Top and bottom heat with revolving spit and
convection
Bottom Control: Time / Main Switch
Select an operating time of up to 90 minutes.
The oven is switched off at position OFF. The control lamp
is off.
Notes for Use
Before Initial Use
There is a protective layer on the heating element. To
remove this, operate the appliance for about 15 minutes
without any contents. Set the function switch to
.
NOTE:
Any smoke or smells produced during this procedure are
normal. Please ensure sufcient ventilation.
Electrical Connection
1. Make sure that the function switch is in the OFF position.
2. Check whether the mains voltage that you want to use
matches the one of the appliance. You will nd the infor-
mation about this on the type plate.
3. Insert the plug in a duly installed protective contact
socket.
CAUTION: Overload
When using extension cords, these should have a cable
cross-section of at least 1.5 mm².
Removal Tool (11 / 13)
a) To remove the baking tray
b) To remove the grill rack
If you want to remove the revolving
spit, use the removal tool (13).
CAUTION:
The removal tools are not suitable for getting the pizza
stone out of the appliance. The pizza stone could be
damaged.
To take the hot pizza stone out of the appliance, please
use oven mitts.
Operation
WARNING:
Never use containers made from plastic, cardboard,
paper, or similar. Risk of re!
Do not use roasting bags or glass containers. These
may burst.
Also, when using the handles for the baking sheet or
the revolving spit, protect yourself from the heat by
using gloves or pot cloths.
CAUTION:
Do not overload the baking tray and the grill rack!
(max. 3,5 kg)
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann MBG 6023 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann MBG 6023 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info