651930
27
Zoom out
Zoom in
Previous page
1/32
Next page
27
Troubleshooting
TroubleshootingTroubleshooting
Troubleshooting
Before you contact an authorized specialist
Before you contact an authorized specialistBefore you contact an authorized specialist
Before you contact an authorized specialist
You need the service may not call if you read this troubleshooting table.
Problem
ProblemProblem
Problem
Possible cause
Possible causePossible cause
Possible cause
Solution
SolutionSolution
Solution
The device is
not working
properly or at
all.
- Is the unit not connected to mains power?
- Is the temperature control properly set?
- Is the place unqualified?
- Do food items prevent the device door from
closing properly?
- Are the ventilation openings clear of ob-
struction?
- Insert the plug properly in the contact sock-
et. Check the fuse.
- Check the temperature setting.
- Check the ambient temperature.
- Arrange the food properly.
- Unblock the ventilation openings, install the
device freely.
Device cools
too much.
Is the temperature control set properly? Check the temperature setting.
The food is too
warm.
- Is the temperature control set properly?
- Was the device door open for an extended
period?
- Was large quantity of food placed in the
device within the last 24 hours?
- Is the device near a heat source?
- Check the temperature setting.
- Open the door only as long as necessary.
- Turn the control panel to a colder setting
temporally.
- Check the installation location (see “Installa-
tion”).
Loud noise
during opera-
tion.
Does the device not stand vertical or horizon-
tal?
Adjust the feet accordingly.
Liquid flow sounds in the cooling circuit are
normal.
Water on the
bottom.
- Is the temperature control set properly?
- Is the water discharge opening blocked?
- Check the temperature setting.
- Check the discharge opening.
Light does not
work.
- Is the unit not connected to mains power?
- Is the light bulb defect?
- Insert the plug properly in the contact sock-
et. Check the fuse.
- See the section “Reverse the bulb”.
The housing
becomes warm-
ly.
The refrigeration cycle takes place in the foaming. The heat exchangers are installed in the
housing covered. The device cut the interior heat, which must be dissipated through the
housing areas.
Water on the
outer surface.
On days of high humidity, condensation might occur on the outer surface of the device. This is
no malfunction; you may simply wipe the water off.
NOTE:
NOTE:NOTE:
NOTE:
If a problem still persists after following the steps above, please contact your trader or an authorized
technician.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann KSR 350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KSR 350 in the language / languages: English, German as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info