814358
22
Zoom out
Zoom in
Previous page
1/24
Next page
22
Disconnect the appliance from the power supply!
Loosen the lamp box with a screwdriver and re-
move it downwards.
Pull out the cable and disconnect the plug con-
nection.
Carefully unlock the light strip from the lamp box.
Replace defective lamp and reassemble properly
in reverse order.
Replacing the door hinge
If the appliance door starts to stutter, crack or jam
when you open it, it is probably due to a worn or
damaged hinge.
It is recommended to replace all door hinges at the
same time, otherwise the next repair will soon be
beckoning.
Remove the contents of the appliance and the
movable interior parts.
Tilt the appliance backwards and block it in this
position to prevent the door from sliding out.
First, disassemble the hinge cover to be able to
loosen the upper door hinge.
First, disassemble the plinth panel to be able to
loosen the lower door hinge.
The respective hinge assembly is carried out in
reverse order.
Open and close the appliance door for a test run,
readjust the hinges if necessary. In any case,
make sure that the door fits tightly and accurately.
Troubleshooting
Before you contact an authorized specialist
Problem / Cause / Action
Appliance is not working properly or at all
- Check the power supply / temperature setting /
ambient temperature.
- Unblock the ventilation openings, install the ap-
pliance freely.
Loading is too warm
- Check the temperature setting / ambient temper-
ature.
- The appliance door is not closed properly, check
the door seal.
Loud noise during operation
- Check that the appliance is level.
-
See
"Operating noise"
.
Water on the appliance bottom
- Check the temperature setting / water discharge
channel or opening.
Light does not work
- Check the power supply.
- See
“Changing the light”
.
NOTE:
If a problem persists after following the steps above,
contact your trader or an authorized technician.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann KSG 7351 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KSG 7351 in the language / languages: English, German as an attachment in your email.

The manual is 0.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info