814354
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
Connect the mains cable to a properly installed
and earthed wall outlet.
If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
Reversing the door opening
If required, the door opening can be moved from the
right (supplied condition) to the left side.
WARNING:
When replacing the door stop, the appliance must be
disconnected from the power supply first.
NOTE:
Ask another person to assist.
You possibly need:
screw wrench, Phillips screw-
driver as well as a thin-blade screwdriver.
Remove the plastic rivet (1) and hinge cover (2).
Loosen the screws (3) and remove the door hinge
(4). Lift the unit door from the door hinge (6).
Displace the dummy plug (5) of the appliance
door. Place the appliance door safely aside.
Tilt the unit slightly backwards and block it in this
position.
Disassemble the lower door hinge (6) incl. foot by
loosening the screws (7). Unscrew the separate
foot (8).
Displace and fasten the door hinge (6) incl. foot
with the screws (7) accordingly. Screw in the sep-
arate foot (8).
Return the unit to the upright position. Place the
appliance door on the hinge pin and fix it in the in-
tended position.
Displace and fasten the upper door hinge (4) with
the screws (3) accordingly.
Put the plastic rivet (1) in the exposed hole and
replace the hinge cover (2).
Check that the door is aligned vertically and horizon-
tally to ensure proper opening and closing of the
door.
Startup / Operation
Prior to first use
CAUTION:
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter
“Cleaning and maintenance”
.
Starting the appliance
Connect the appliance to the power supply.
Set the operating conditions. See also the follow-
ing sections.
Settings
The power levels [ 1 5 ] regulate the different val-
ues of the internal temperature.
Power level
1, 2
lowest level,
warmest internal temperature
3
medium level,
recommended operating temperature
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann KSG 7282.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KSG 7282.1 in the language / languages: English, German as an attachment in your email.

The manual is 0.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info