552275
6
Zoom out
Zoom in
Previous page
1/10
Next page
6
05/2013
R
EVERSE THE
D
OOR
O
PENING
If required, the door opening can be moved from the right to the left side or from left to right side.
Warning!
When replacing the door stop, the device must be disconnected from the power supply. Always unplug
the device first.
- Ensure the appliance is unplugged and empty.
- We recommend you have someone to assist you.
Tools required
- Cross-shaped screwdriver
- Thin-blade screwdriver
- Hexagonal spanner
Note: Take the door off it is necessary to tilt the cooler backward. You should rest the cooler on some-
thing solid and place something under the rollers so that it will not slip during the door change process.
DO NOT
lay the cooler completely flat as this may damage the coolant system.
Remove the screws and hinge bracket from the base.
Slide the door down and remove away from the unit. Place the door on a padded surface to pre-
vent it from scratches and damages.
Remove the top hinge pin inside the door and refit on the opposite side.
Slide the door back on the top hinge. Screw the bottom hinge into place on the new side.
Check that the door is aligned horizontally and vertically and that the seals are closed on all sides
before finally tightening the bottom hinge. Re-adjust the leveling feet.
Check if the door is arranged vertical as well as horizontal, so that a smooth opening and closing
of the door is ensured.
S
TART
U
P
O
PERATION
Prior to first use
ATTENTION: After transport, the device should be left standing for 4 hours in order for the oil to
be collected in the compressor.
Nonobservance could cause damage to the compressor and hence
result in failure of the device. This would void your warranty claim.
- Clean the interior of the device including all accessory parts located inside.
Tip 1:
Insert 2 or 3 plastic rings on the door hinge.
Tip 2:
If you don’t need the door supporter, please change it
to the normal foot (only for model KSG233)
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann KSG 232 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KSG 232 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann KSG 232

Bomann KSG 232 User Manual - German - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info