814318
23
Zoom out
Zoom in
Previous page
1/32
Next page
23
Transfer and attach the lower door hinge to the
opposite appliance side. Screw in the feet accord-
ingly.
Put the appliance back in the upright position.
Put on the appliance door and fix it its intended
position.
Transfer and attach the upper door hinge to the
opposite appliance side after unscrewing the
hinge pin and inserting it into the adjacent hole.
Screw in the screws (s) on the opposite side.
Replace the appliance cover and fix it.
Dismount the door handle and attach it to the
corresponding other door outer side. Refer to the
instructions in
"Assembling the door handle".
Transfer the cover caps on the exposed holes to
the respective other door outer side.
Check that the door is optimally aligned both vertical-
ly and horizontally to ensure smooth opening and
closing of the door.
Reversing the freezer door opening
Keep the freezer compartment door closed. Dis-
mount the holding (1).
Remove the freezer door including the upper
hinge pin cover (a) to the below.
Dismount the snapper (2) and attach it to the op-
posite side.
Seal the now exposed holes with the supplied
plugs (b). Turn the door by 180° and transfer it to
the opposite side. Move the upper hinge pin cover
(a) accordingly.
Keep the freezer compartment door closed. At-
tach the holding (1) on the opposite side.
Startup / Operation
Prior to first use
CAUTION:
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter
“Cleaning and Maintenance”.
Starting the appliance
Connect the appliance to the power supply.
Set the operating conditions. See also the follow-
ing sections.
Settings
Position [ 0 ] means that the appliance is in the
switched-off state. Turn the temperature control
clockwise from this position, the appliance switches
on automatically.
The power levels control the different values of the
internal temperature.
Power level
1, 2
lowest level,
warmest internal temperature
3, 4
medium level,
optimal operating temperature
5, 6, 7*
highest level,
coldest internal temperature
*Beware of high setting because the maximum level may
already mean "freezing point".
The freezer temperature is automatically con-
trolled by the power level setting in the fridge.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann KS 2194.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KS 2194.1 in the language / languages: English, German as an attachment in your email.

The manual is 1.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info