688028
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
NOTE
NOTENOTE
NOTE:
::
:
When installing, ask another person to assist.
You possibly need:
screw wrench, Phillips screw-
driver as well as a thin-blade screwdriver.
Loosen the screws at
the appliance rear and
remove the top cover.
Dismount the upper door hinge and
the opposite screws. Open the ap-
pliance door a little and lift it out.
Place the appliance door safely
aside.
Tilt the appliance slightly backwards and block it
in this position. Unscrew the
feet and dismount the lower
door hinge.
Attach the door hinge at the
other appliance side, after
you have unscrewed the
hinge pin (1) and used it at
the other hinge side (2).
Turn in the feet accordingly.
Replace the appliance upright. Put the appliance
door on the hinge pin and fix it in its intended po-
sition.
Transfer the upper door hinge
and the screws on the respective
opposite appliance site. Put the
hinge pin in the hole of the appliance door and
tighten the screws.
Replace the top cover,
which you have removed
at the beginning and
tight the screws.
Check if the door is aligned vertically and horizon-
tally optimally so that the smooth opening and
closing of the door is guaranteed.
Dismount the door handle and attach it to the
corresponding other door outer side. Refer to the
instructions in "Assembling the door handle".
Transfer the cover caps on the exposed holes to
the respective other door outer side.
Reverse the freezer door opening
Reverse the freezer door openingReverse the freezer door opening
Reverse the freezer door opening
Keep the freezer compartment
door closed. Dismount the hold-
ing (1).
Remove the freezer door including
the upper hinge pin cover (a) to the
below.
Dismount the snapper (2) and
attach it to the opposite side.
Seal the now exposed
holes with the supplied
plugs (b).
Turn the door by 180° and trans-
fer it to the opposite side. Move
the upper hinge pin cover (a) ac-
cordingly.
Keep the freezer compartment
door closed. Attach the holding
(1) on the opposite side.
Startup / Operation
Startup / OperationStartup / Operation
Startup / Operation
Prior to first use
Prior to first usePrior to first use
Prior to first use
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
After transport, the appliance should be left standing
upright for about 4 hours before connecting to the
power supply. Nonobservance could lead to malfunc-
tion of the cooling system and causes an appliance
breakdown.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter “Cleaning and Maintenance”.
Starting the appliance
Starting the applianceStarting the appliance
Starting the appliance
Connect the appliance to the power supply.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann KS 2184 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KS 2184 in the language / languages: German as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info