814350
23
Zoom out
Zoom in
Previous page
1/32
Next page
23
Remove the hinge cover and dismount the upper
door hinge.
Lift out the fridge door; move the door stopper on
the door underside. Set the door safely aside.
Dismount the middle door hinge. Lift out the
freezer door; move the door stopper on the door
underside. Set the door safely aside.
Tilt the appliance slightly backwards and block it
in this position. Unscrew the feet and dismount
the lower door hinge.
Transfer and fasten the lower door hinge to the
opposite unit side; after you have unscrewed the
hinge pin and inserted it on the other hinge side.
Screw in the feet accordingly.
Put the appliance back in the upright position.
Move the blind plugs to the exposed holes of the
middle door hinge.
Put on the freezer door and fix it in the intended
position.
Rotate the middle door hinge by 180°, move and
fasten it on the opposite unit side.
Move the dummy cap on the appliance top into
the opposite exposed holes.
Put on the fridge door and fix it in the intended
position.
Transfer and fasten the upper door hinge on the
opposite unit side; after you have unscrewed the
hinge pin and inserted it from the other hinge
side.
Put on the hinge cover* included in the scope of
delivery.
Check that the doors are aligned vertically and hori-
zontally to ensure proper opening and closing of the
doors.
Startup / Operation
Prior to first use
CAUTION:
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter
“Cleaning and maintenance”.
Starting the appliance
Connect the appliance to the power supply.
Set the operating conditions. See also the follow-
ing sections.
Settings
Position [ 0 ] means that the appliance is in the
switched-off state. Turn the temperature control
clockwise from this position, the appliance switches
on automatically.
The power levels control the different values of the
internal temperature.
Power level
1, 2
lowest level,
warmest internal temperature
3, 4
medium level,
optimal operating temperature
5, 6, 7*
highest level,
coldest internal temperature
*Beware of high setting because the maximum level may
already mean "freezing point".
The freezer temperature is automatically con-
trolled by the power level setting in the fridge.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann KG 7352 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KG 7352 in the language / languages: English, German as an attachment in your email.

The manual is 0.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info