754672
21
Zoom out
Zoom in
Previous page
1/28
Next page
21
Loosen the hinge and screw cover on the top of
the device and disconnect the respective plug
connections.
Detach the door contact switch from the hinge
cover and insert it into the delivered hinge cover.
Disomount the upper door hinge and lift out the
fridge door.
Remove the door stopper on the door underside
and attach the delivered door stopper to the other
door underside.
Dismount the middle door hinge. Lift out the free-
zer door.
Remove the door stopper on the door underside
and attach the delivered door stopper to the other
door underside.
Move the blind plug on the door topside and set
the door safely aside.
Tilt the device slightly backwards and block it in
this position. Unscrew the feet and dismount the
lower door hinge.
Transfer and attach the lower door hinge to the
opposite device side; after you have unscrewed
the hinge pin and inserted it from the other side of
the hinge. Screw in the feet accordingly.
Put the device back in the upright position. Move
the blind plugs to the exposed holes of the middle
door hinge.
Put on the freezer door and fix it in the intended
position.
Rotate the middle door hinge by 180°, move and
fasten it on the opposite device side.
Put on the fridge door and fix it in the intended
position.
Transfer and fasten the upper door hinge on the
opposite device side; after you have unscrewed
the hinge pin and inserted it from the other side of
the hinge.
Connect the respective plug connections and
fasten the hinge and screw covers accordingly.
Check the door rubber seal for an exact fit and, if
necessary, bring it into the correct position.
Check that the doors are aligned vertically and hori-
zontally to ensure proper opening and closing of the
doors.
Startup / Operation
Prior to first use
CAUTION:
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter “Cleaning and Maintenance”.
Starting the appliance
Connect the appliance to the power supply.
Operate the temperature control. See also the
section "Settings".
Settings
Setting [ OFF ] means that the appliance is in the off
state. Turn the temperature control clockwise, start-
ing from this setting; the appliance will turn on auto-
matically.
Temperature control
The power levels [ COLD –
COLDEST ] regulate the differ-
ent values of the internal tem-
perature.
Power level COLD:
lowest level → warmest internal temp.
Temperature range approx. +4°C∼+10°C
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann KG 7333 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KG 7333 in the language / languages: English, German as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info