688056
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
Reversing
ReversingReversing
Reversing
the door opening
the door openingthe door opening
the door opening
If required, the door openings can be moved from the
right (supplied condition) to the left side.
WARNING:
WARNING:WARNING:
WARNING:
When replacing the door stops, the appliance must
be disconnected from the power supply first.
NOTE
NOTENOTE
NOTE:
::
:
Ask another person to assist.
You possibly need:
screw wrench, Phillips screw-
driver as well as a thin-blade screwdriver.
Remove the cover plugs, loosen the screws
underneath and remove
the appliance cover.
Loosen the blind cap (c).
Dismount the upper door hinge; lift the upper door
out of the middle door hinge.
Dismount the door stopper (a) on the underside
of the appliance door and attach
the enclosed door stopper (b).
Move the blind cap on the top of
the appliance door.
Set the appliance door safely aside.
NOTE
NOTENOTE
NOTE:
::
: Keep the door stopper (a) for another possible
doorstop change.
Dismount the middle door hinge; lift the lower
door out of the lower door hinge.
Dismount the door stopper (a) on the underside
of the appliance door and attach
the enclosed door stopper (b).
Move the blind plug on the top of
the appliance door.
Set the appliance door safely aside.
NOTE
NOTENOTE
NOTE:
::
: Keep the door stopper (a) for another possible
doorstop change.
Transfer the blind plugs on the exposed holes
of the middle door hinge.
Tilt the appliance slightly backwards and lock it in
this position.
Unscrew the feet and remove the lower door
hinge.
Transfer the lower door hinge to the opposite
appliance side after you have unscrewed
the
hinge pin and replaced it from
the other hinge side.
Fix the hinge and turn in the feet accordingly.
Put the appliance back in the upright position.
Place the lower appliance door on the lower hinge
pin and fix it in the intended position.
Turn the middle door hinge about 180° and
transfer it to the opposite appliance side. Insert
the hinge pin into the hole of the lower door and
fix the hinge.
Place the upper appliance door on the middle
hinge pin and fix it in the intended position.
Transfer the lower door hinge to the opposite
appliance side after you have unscrewed the
hinge pin and replaced it from
the other hinge side.
Insert the hinge pin into the hole of the upper door
and fix the hinge.
Fasten the appliance cover. Replace the cover
plugs and insert the
blind cap (c).
Check that the doors are aligned vertically and
horizontally to ensure proper opening and closing of
the doors.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann KG 7306 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KG 7306 in the language / languages: English, German as an attachment in your email.

The manual is 7,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info