688054
27
Zoom out
Zoom in
Previous page
1/36
Next page
27
Release the doorstop (a) and fasten
the doorstop (b)* on the underside of
the door. Set the door safely aside.
Disassemble the middle door hinge;
lift out the lower unit door.
Change the positions of the blind plug
and the hinge pin holder on the top of
the door.
Move the doorstop on the underside
of the door. Set the door safely aside.
Tilt the unit slightly backwards and
lock it in this position. Unscrew the
feet and disassemble the lower door
hinge.
Transfer and fasten the lower door
hinge to the opposite appliance side;
after moving the pin to limit the door
opening into the exposed hole. Screw
in the feet.
Put the appliance back in the upright
position. Move the blind plugs/screw
on the exposed holes of the middle
door hinge.
Put on the lower door and fix it in its
intended position.
Turn the middle door hinge about
180°, transfer and fasten it to the
opposite appliance side.
Put on the upper appliance door and
fix in its intended position.
Transfer and fasten the upper door
hinge to the opposite appliance side,
after unscrewing the blind cap and
screwing it in again on the other
appliance side.
Replace the hinge cover.
Check that the doors are aligned
vertically and horizontally to ensure
proper opening and closing of the doors.
Startup / Operati
Startup / OperatiStartup / Operati
Startup / Operation
onon
on
Prior to first use
Prior to first usePrior to first use
Prior to first use
CAUTION:
CAUTION:CAUTION:
CAUTION:
After transport, the appliance should be
left standing upright for 24 hours before
connecting to the power supply. Nonob-
servance could lead to malfunction of the
cooling system and causes an appliance
breakdown.
Clean the appliance interior including all
accessory parts. Consider the instruc-
tions which we provide in the chapter
“Cleaning and Maintenance”.
Starting the appliance
Starting the applianceStarting the appliance
Starting the appliance
Connect the appliance to the power
supply.
Operate the control panel. See also
the section.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann KG 7303 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KG 7303 in the language / languages: English, German as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info