688049
29
Zoom out
Zoom in
Previous page
1/32
Next page
29
Repairs
RepairsRepairs
Repairs
A wrong or improperly performed repair brings danger to the user.
Repairs to electrical appliances must only be carried out by an authorized specialist. A damaged pow-
er cord must be changed only by a qualified electrician.
Troubleshooting
TroubleshootingTroubleshooting
Troubleshooting
Before you contact an authorized specialist
Before you contact an authorized specialistBefore you contact an authorized specialist
Before you contact an authorized specialist
The following problems can be solved by you by checking for the possible cause.
Problem
ProblemProblem
Problem
Possible cause
Possible causePossible cause
Possible cause
Solution
SolutionSolution
Solution
The appliance is
not working
properly or at all.
- Is the unit not connected to mains
power?
- Is the temperature setting correct?
- Is the place unqualified?
- Does the content prevent the appliance
door from closing properly?
- Are the ventilation openings clear of
obstruction?
- Insert the plug properly in the contact
socket. Check the fuse.
- Check the temperature setting.
- Check the ambient temperature.
- Check the appliance content.
- Unblock the ventilation openings, install
the appliance freely.
The content is
not cold enough.
- Is the temperature setting correct?
- Was the appliance door open for an
extended period?
- Was large quantity of food placed in
the appliance within the last 24 hours?
- Check the temperature setting.
- Open the door only as long as necessary.
- Adjust a colder temperature.
The content is
not cold enough
- Is the appliance near a heat source? - Check the installation location (see “In-
stallation”).
Loud noise dur-
ing operation.
Is the appliance not leveled vertically and
horizontally?
Adjust the feet accordingly. Liquid flow
sounds in the cooling circuit are normal.
Water on the
bottom.
- Is the temperature setting correct?
- Is the water discharge opening
blocked?
- Check the temperature setting.
- Check the discharge opening.
Interior light
does not work.
- Is the unit not connected to mains
power?
- Is the light bulb defect?
- Insert the plug properly in the contact
socket. Check the fuse.
- See the section “Interior light”.
The housing
becomes warm-
ly.
The refrigeration cycle takes place in the foaming. The heat exchangers are installed in
the housing covered. The appliance cut the interior heat, which must be dissipated
through the housing areas.
Water on the
outer surface.
On days of high humidity, condensation might occur on the outer surface of the appli-
ance. This is no malfunction; you may simply wipe the water off.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann KG 322 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KG 322 in the language / languages: German as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info