552179
8
Zoom out
Zoom in
Previous page
1/14
Next page
8
04/2012
12. Turn the bracket 6 around 180° together with the washers on the axle and the plastic spacer.
Remove the axle and the washers and reattach them on the other side of the bracket. Once
the bracket 6 is attached to the refrigerator compartment door, fix it in place on the other side
of the appliance in the uppermost apertures. Use the covers c to cover the bracket and the
remaining space.
13. Remove the bolt covers a and the stoppers b. Remove the screws that hold the handles in
place. Move the handles to the other side and screw them in place. Place the stoppers into the
remaining apertures in the door, and put the screw caps in place.
14. Place the cover 10 into guides of the bottom cover 1 on the opposite side and attach the cover
1 to its former place.
STARTUP / OPERATION
Prior to first use
ATTENTION
After transport, the device should be left standing for 4 hours in order for the oil to be collected in the
compressor.
Nonobservance could cause damage to the compressor and hence result in failure of the
device. This would void your warranty claim.
Clean the interior of the device including all accessory parts located inside.
Connect the device to the mains supply
IMPORTANT
The device must be earthed properly. For this purpose the plug of the mains cable has been fitted
with the intended lead.
Contact an electrician if the plug does not fit in the wall socket.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann KG 210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KG 210 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann KG 210

Bomann KG 210 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info