Manual Bomann KA3003 (page 30 of 56) (English, German, Dutch, French, Italian, Polish, Spanish)

687868

Zoom out

Zoom in

1/56

KA3003CB_IM_neu 08.08.17

Scope of Delivery

1 Automatic coffee maker

1 Filter holder

1 Glass coffee pot

1 Coffee pot lid

Unpacking the Appliance

1. Remove the appliance from its packaging.

2. Remove all packaging material such as plastic lms, ller

material, cable ties and cardboard packaging.

3. Check the content for any missing parts.

4. In the event that the packaging content should be incom-

plete or if damages are noticeable, do not operate the

appliance. Return it to the dealer immediately.

NOTE:

There may be dust and production residue on the appli-

ance. We recommend cleaning the appliance as described

under “Cleaning”.

Notes on Use

Placement

• Place the automatic coffee maker on a stable and level

surface. Place the appliance in such way that it cannot

tip over.

• Do not place the appliance in close proximity to a gas or

electric stove or any other heat source.

Note About the Brewing Process

During the brewing process and depending on the degree of

grinding and the used amount, the coffee powder absorbs

a certain amount of water. That is why the quantity of coffee

might diverge from the quantity of water in the water tank.

European Regulations on Energy Saving

NOTE:

The European Directive 2009 / 125 / EC (Ecodesign Direc-

tive) incorporates measurements for energy saving.

The following applies to coffee makers: The keep-warm pe-

riod is limited to max. 40 minutes after which the appliance

turns off automatically.

You benet from better safety and lower energy consump-

tion.

Electric Connection

1. Ensure that your mains power corresponds with the spec-

ications of the appliance. The specications are printed

on the type label.

2. Connect the mains cable to a properly installed and

earthed wall outlet.

Initial Operation

Before making coffee for the rst time operate the appliance

twice with clean water only and without paper lter. This

removes dust, which may have collected during transport.

Follow the instructions given under “Operation”.

Turning the Appliance On / Off

• Press the button to switch on the appliance. The indicator

lamp of the button lights up.

• Press the button again to turn off the appliance or to can-

cel brewing. The indicator lamp of the button turns off.

Operation

1. Open the lid of the water tank.

2. Fill cold water according to the desired amount of cups

of coffee into the rear water tank. You can determine the

water level with the help of the scale in the water tank.

NOTE:

You can use the pot to ll the water tank.

CAUTION:

Do not overll the tank! Do not ll it above the MAX

mark.

3. Insert the lter holder. Pay attention to the guides at the

bottom of the lter holder.

4. Turn over the lower fold of the paper lter (size 1 x 4) and

place it in the lter funnel. Then ll it with coffee powder.

NOTE:

Do not put too much coffee powder into the lter to

avoid spillage.

5. Now close the lid of the water tank. It must engage.

6. Place the jug onto the warming plate.

CAUTION: Drip stop

Your appliance comes with a drip stop. It closes when

removing the coffee pot. This prevents the coffee from

dripping onto the warming plate if there is still water in

the lter.

• Ensure that the lid is attached to the coffee pot. It

opens the drip stop.

• If there is still water in the tank, place the pot under-

neath as soon as possible. Otherwise the lter might

overow.

7. Switch on the appliance. The indicator lamp of the button

lights up.

NOTE:

The appliance switches off automatically about 30 minutes

after the brewing. The indicator lamp of the button turns off.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KA3003 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann KA3003 Manual

Product: