Manual Bomann KA 168 (page 35 of 64) (English, German, Dutch, French, Italian, Polish, Spanish)

687943

Zoom out

Zoom in

1/64

Supplied parts

1 x Automatic coffee maker 1 x Thermos ask

1 x Filter holder 1 x Lid for the ask

Unpacking the appliance

1. Remove the appliance from its packaging.

2. Remove all packaging materials such as lms, ller mate-

rial, cable clips and carton.

3. Check the contents for completeness.

4. In the event that the packaging content should be incom-

plete or if damages are noticeable, do not operate the

appliance. Return it to the dealer immediately.

NOTE:

Production residue or dust may have collected on the appli-

ance. We recommend cleaning the appliance according to

chapter “Cleaning”.

Instructions

Placement

• Place the automatic coffee maker on a stable and level

surface. Place the appliance in such way that it cannot tip

over.

• Do not place the appliance in close proximity to a gas or

electric stove or any other heat source.

Electric Connection

1. Ensure that your mains power corresponds with the speci-

cations of the appliance. The specications are printed on

the type label.

2. Connect the mains cable to a properly installed and earthed

wall outlet.

Operation

Before making coffee for the rst time operate the appliance

twice with clean water only and without paper lter. This

removes dust, which may have collected during transport.

Operation

Preparing the Coffee Machine

1. Open the lid of the water tank.

2. Fill cold water according to the desired amount of cups of

coffee into the rear water tank. The water level is displayed

on the indicator.

NOTE:

You can use the pot to ll the water tank.

CAUTION:

Do not overll the tank! Do not ll it above the 10 mark.

3. Screw the lid onto the ask so that the button on the lid

points towards the handle.

4. Ensure that the lter holder is properly attached.

5. Turn over the lower fold of the paper lter (size 1x4) and

place it in the lter funnel. Then ll it with coffee powder.

6. Close the water reservoir lid until it audibly clicks into place

7. Set the ask with the screwed-on lid onto the hotplate.

CAUTION: Drip stop

Your appliance comes with a drip stop. It closes when

removing the coffee pot. This prevents the coffee from

dripping onto the warming plate if there is still water in the

lter.

• Ensure that the lid is attached to the coffee pot.

It opens the drip stop.

• If there is still water in the tank, place the pot under-

neath as soon as possible. Otherwise the lter might

overow.

8. Turn on the appliance. The pilot lamp in the switch will be

lit.

The Coffee Is Ready

NOTE:

The brewing process lasts approximately. 10-15 minutes.

• When no more coffee is owing through the lter you can

remove the pot.

• Turn the device off. The pilot lamp will go out.

• If you would like to pour coffee from the ask, press the

button on the lid.

NOTE:

The lter holder can be removed from the machine by its

handle. This makes it easier to dispose of the old coffee lter,

for example.

WARNING:

If you would like to brew another ask of coffee right away,

turn off the appliance. Let it cool down with the water reser-

voir open, to prevent hot splashes when relling the water.

De-scaling

De-scaling is necessary when the brewing time increases

substantially.

• Use only commercially available citrus acidbased de-scaler.

• Follow the recommended instructions for use.

WARNING:

• Afterwards you should boil fresh water in the pot three or

four times in order to rinse out residues of the descaling

agent.

• Do not use any coffee powder!

• Do not use this water for consumption.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KA 168 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann KA 168 Manual

Product: