651958
30
Zoom out
Zoom in
Previous page
1/56
Next page
30
Electric Connection
NOTE:
Make sure the device is switched off. The switch must be at
the “0” position.
1. Ensure that your mains power corresponds with the speci-
cations of the appliance. The specications are printed on
the type label.
2. Connect the mains cable to a properly installed and earthed
wall outlet.
Operation
Before making coffee for the rst time operate the appliance
twice with clean water only and without paper lter. This re-
moves dust, which may have collected during transport. Follow
the instructions given under “Operation”.
Operation
1. Open the lid of the water tank.
2. Fill cold water according to the desired amount of cups of
coffee into the rear water tank. The water level is displayed
on the indicator.
NOTE:
You can use the pot to ll the water tank.
CAUTION:
Do not overll the tank! Do not ll it above the MAX mark.
3. Ensure that the lter holder is properly attached.
4. Turn over the lower fold of the paper lter (size 1x4) and
place it in the lter funnel. Then ll it with coffee powder.
5. Now close the lid of the water tank.
6. Screw the lid onto the pot so that the button on the lid
points towards the handle.
7. Place the jug onto the warming plate.
CAUTION: Drip stop
Your appliance comes with a drip stop. It closes when
removing the coffee pot. This prevents the coffee from
dripping onto the warming plate if there is still water in the
lter.
Ensure that the lid is attached to the coffee pot. It
opens the drip stop.
CAUTION: Drip stop
If there is still water in the tank, place the pot under-
neath as soon as possible. Otherwise the lter might
overow.
8. Switch on the device. The indicator lamp in the switch will
light up.
The Coffee Is Ready
NOTE:
The brewing process lasts approximately 10 minutes.
When no more coffee is owing through the lter you can
remove the pot.
Turn the device off.
If you want to pour coffee from the pot, press the button on
the lid.
NOTE:
The lter holder can be removed from the machine by its
handle.
This makes it easier to dispose of the old coffee lter, for
example.
WARNING:
If you want to make another pot of coffee immediately, switch
off the device rst. Let it cool down with the water tank open
in order to avoid hot water splashing when relling with water.
De-scaling
De-scaling is necessary when the brewing time increases
substantially.
Use only commercially available citrus acidbased de-scaler.
Follow the recommended instructions for use.
WARNING:
Afterwards you should boil fresh water in the pot three or
four times in order to rinse out residues of the descaling
agent.
Do not use any coffee powder!
Do not use this water for consumption.
Cleaning
WARNING:
Before cleaning, always remove the mains plug and wait until the
device has cooled down.
Do not immerse the device in water. Otherwise this might result in
an electric shock or re.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann KA 1370 CB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KA 1370 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info