Manual Bomann KA 1369 CB (page 29 of 56) (English, German, Dutch, French, Italian, Polish, Spanish)

651959

Zoom out

Zoom in

1/56

Instructions

Placement

• Place the automatic coffee maker on a stable and level

surface. Place the appliance in such way that it cannot tip

over.

• Do not place the appliance in close proximity to a gas or

electric stove or any other heat source.

Electric Connection

NOTE:

Make sure the device is switched off. The switch must be

at the “0” position.

1. Ensure that your mains power corresponds with the speci-

cations of the appliance. The specications are printed on

the type label.

2. Connect the mains cable to a properly installed and earthed

wall outlet.

Operation

Before making coffee for the rst time operate the appliance

twice with clean water only and without paper lter. This re-

moves dust, which may have collected during transport. Follow

the instructions given under “Operation”.

Operation

1. Open the lid of the water tank.

2. Fill cold water according to the desired amount of cups of

coffee into the rear water tank. The water level is displayed

on the indicator.

NOTE:

You can use the pot to ll the water tank.

CAUTION:

Do not overll the tank! Do not ll it above the MAX mark.

3. Ensure that the lter holder is properly attached.

4. Turn over the lower fold of the paper lter (size 1x4) and

place it in the lter funnel. Then ll it with coffee powder.

5. Now close the lid of the water tank.

6. Place the jug onto the warming plate.

CAUTIION: Drip stop

Your appliance comes with a drip stop. It closes when

removing the coffee pot. This prevents the coffee from

dripping onto the warming plate if there is still water in the

lter.

• Ensure that the lid is attached to the coffee pot. It

opens the drip stop.

• If there is still water in the tank, place the pot under-

neath as soon as possible. Otherwise the lter might

overow.

7. Switch on the device. The indicator lamp in the switch will

light up.

The Coffee Is Ready

NOTE:

The brewing process lasts approximately. 8-12 minutes.

• When no more coffee is owing through the lter you can

remove the pot.

• Turn the device off.

• Would you like to keep the remaining coffee warm? Leave

the machine switched on until the pot is empty.

NOTE:

The lter holder can be removed from the machine by its

handle. This makes it easier to dispose of the old coffee lter,

for example.

WARNING:

If you want to make another pot of coffee immediately, switch

off the device rst. Let it cool down with the water tank open

in order to avoid hot water splashing when relling with water.

De-scaling

De-scaling is necessary when the brewing time increases

substantially.

• Use only commercially available citrus acidbased de-scaler.

• Follow the recommended instructions for use.

WARNING:

• Afterwards you should boil fresh water in the pot three or

four times in order to rinse out residues of the descaling

agent.

• Do not use any coffee powder!

• Do not use this water for consumption.

Cleaning

WARNING:

• Before cleaning, always remove the mains plug and wait

until the device has cooled down.

• Do not immerse the device in water. Otherwise this might

result in an electric shock or re.

CAUTIION:

• Do not use a wire brush or any abrasive items.

• Do not use any acidic or abrasive detergents.

• The exterior of the device should be cleaned as necessary

with a slightly damp cloth – without any additives.

• Remove spilled coffee grounds with a paper towel from the

inner casing. Afterwards wipe with a damp cloth.

• The coffee pot and the lter pad should be cleaned by rins-

ing in warm water. Use a soft brush if necessary.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KA 1369 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 6,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann KA 1369 CB Manual

Product: