814804
32
Zoom out
Zoom in
Previous page
1/52
Next page
32
Commissioning
Unwind the mains cable completely.
Attach a nozzle if necessary.
You can dry single hair locks by concentrating the ow
of hot air with the hairdressing nozzle.
The diffuser is the ideal solution to dry curly hair without
losing volume.
In order to replace the attachment, rst remove the old at-
tachment by pulling it off and then pushing on the new one
until it clicks into place.
Electrical Connection
Before inserting the plug into the socket. Make sure that
the mains voltage to be used matches that of the device.
You can nd this information on the nameplate.
Connect the appliance to a properly installed earthed
socket.
Use
Setting the Temperature Level (right switch):
Position :cold air
Position •• :medium temperature for gentle drying and
shaping
Position ••• :high temperature for rapid drying
Setting the desired blower strength (left switch):
Position 0:cold air
Position :gentle stream of air
Position :strong stream of air
Button :With this switch it is possible to interrupt
the heating process so that the air can be
mixed according to individual requirements.
Hold the button down in this position ac-
cording to the desired interval length. When
the button is released it returned automati-
cally to the initial position.
Switch-off
After use, slide the switch to position 0” and disconnect from
the mains.
Storage
Leave the device to cool before putting it away! To do so,
place the appliance onto one side of the housing or hang it
up by the suspension eye.
Fold the handle up to save space and keep the appliance
in the see-through bag.
Mains Cable
The mains cable should only be wound up loosely.
Never tie the cable tightly round the device, as over time
this may result in the cable breaking.
Check the mains cable regularly for damage.
Maintenance and care
WARNING:
Before cleaning remove the mains lead from the socket.
Under no circumstances should you immerse the device in water
for cleaning purposes. Otherwise this might result in an electric
shock or re.
CAUTION:
Do not use a wire brush or any abrasive items.
Do not use any acidic or abrasive detergents.
Clean the housing with a soft, dry cloth without additives.
Air Intake Grill
Please clean the grill on the air intake side of the hairdryer
regularly in order to avoid excessive temperatures as a result of
heat accumulation.
Remove any dirt that is present.
If necessary, a ne brush can be used.
Twist off the grille in an anticlockwise direction, remove the
air inlet lter and clean it under running water.
Please allow the lter to try before reinserting it.
Turn the grille tight in a clockwise direction.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann HTD 889 CB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann HTD 889 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 6.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info