Manual Bomann HM 6054 CB (page 27 of 50) (English, German, Dutch, French, Italian, Polish, Spanish)

814437

Zoom out

Zoom in

1/50

HM6054CB_IM 16.06.21

Overview of the Components /

Scope of Delivery

1 Release button

2 5-stage speed switch

3 TURBO button

4 Mains lead

5 Housing

6 Beaters

7 Ring marking

8 Dough hooks

Notes for Use

• For best results, use high-quality containers that are not

too big.

• In order to avoid splashing, always submerge the dough

hooks or beaters fully into the food to be mixed before

switching on the appliance.

• Short-term operation: Do not operate the mixer for

more than 3 minutes. Then let it cool down for approxi-

mately 10 minutes before using it again.

• The appliance is suitable for small quantities only! Fill

containers with the maximum quantities only as indicated

in the table!

Assembly of Accessories

NOTE:

• The dough hook with the ring marking on its shaft must

only be attached to the right (larger) tting of the mixer.

The other dough hook is intended for the left tting.

• It does not matter which beater is inserted into which

opening.

1. Make sure the switch is at the “0” position and the appli-

ance disconnected from the mains.

2. Press the ends of the dough hooks or the beaters into

the openings provided in the mixer until they snap into

place. Slightly turning the accessories might help facili-

tate the process of attaching.

Releasing the Dough Hooks / Beaters

Press the release button to release the accessories.

NOTE:

The accessory can only be ejected when the speed

switch is in the “0” position.

Electric Connection

1. Make sure the switch is at the “0” position.

2. Before you plug the mains plug into the outlet, check

whether the system voltage that you want to use,

matches the one of the appliance. You will nd informa-

tion about it on the type plate.

3. Connect the appliance to a correctly installed grounded

outlet.

Turning On / Off

• In order to switch on the appliance, set the switch to one

of the positions from “1” to “5”.

• When at the “0” position, the appliance is switched off.

Speed Settings

Switch position 1 = lowest speed setting

Switch position 5 = highest speed setting (TURBO)

All speed settings allow you to temporarily switch to the

highest speed setting. In order to do so, press the TURBO

button during operation.

Please choose the accessories and speed setting according

to the table below:

Table

Product / method of preparation Max. quantity Accessories Speed setting Max. operating time

Heavy dough (e. g. yeast dough) 500 g Dough hooks 1 – 4 3 minutes

Cake batter or light crêpes mixture 750 g Beaters 2 – 5 (or TURBO) 3 minutes

Sponge mixture, wafe mixture, cream 750 g Beaters 2 – 5 (or TURBO) 3 minutes

Operation

1. Place the container with the ingredients on a at surface.

2. Make sure the switch is at the “0” position and the appli-

ance disconnected from the mains.

3. Attach all accessories.

4. Connect the appliance to a properly installed earthed

socket.

5. Insert the dough hooks or beaters into the food to be

mixed. Set the desired speed with the speed switch.

Begin at a low speed (level 1 – 2) and then increase this

if necessary.

6. Tilt the appliance slightly up and down.

7. Always turn the appliance off before removing it from

the vessel.

Ending Operation

1. Set the switch to “0” position and wait until the motor has

come to a complete stop.

2. Disconnect the plug from the outlet.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann HM 6054 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1.79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann HM 6054 CB Manual

Product: