Manual Bomann HL 6064 CB (page 14 of 62) (English, German, Dutch, French, Italian, Polish, Spanish)

814766

Zoom out

Zoom in

1/62

HL6064CB_IM 22.03.23

Operation

Electric Connection

1. Make sure the voltage of the appliance (see rating label)

matches the mains voltage to be used.

2. Set the function control knob to 0.

3. Unwind the mains cable completely.

4. Only connect the mains plug with a properly installed

earthed socket.

Setting the Temperature

The thermostat constantly switches the fan heater on and

off, thereby keeping the temperature at the desired level.

Set the desired temperature as followed:

1. Set the temperature control to its highest setting.

2. Once the desired temperature has been reached, slowly

turn the temperature control back, until the fan heater

switches off audibly. The indicator lamp turns off.

NOTE:

The audible position of the temperature control de-

pends on the ambient temperature.

3. The fan heater will then keep the desired temperature

level.

CAUTION:

When not using the appliance, disconnect the mains plug.

Oscillation

To achieve even heating or ventilation, the appliance is

additionally equipped with an oscillation function.

There is a switch on the back of the appliance to switch the

oscillation mode on or off.

0 = Oscillation switched off

I = Oscillation switched on

CAUTION:

Never adjust the swivel mechanism with your hand. The

mechanism could be damaged.

Fan Operation

If you want to use the appliance as a fan, turn the function

control knob to the fan icon and turn the temperature control

to highest position.

End Operation

If you want to end the operation, set the function control

knob to the position 0. The indicator lamp turns off. Then

disconnect the mains plug from the socket.

Overheat Protection

The appliance features an overheat protection mechanism

causing the appliance to switch off automatically in case of

overheating.

1. Set the function control knob to position 0 and pull the

mains plug out of the socket.

2. Let the appliance cool down for approx. 10 minutes

before using it again.

NOTE:

If the overheat protection mechanism causes the appli-

ance to switch off again after a short period, this might

indicate a defect.

1. Switch off the appliance and disconnect it from the

mains.

2. Have the appliance checked by your dealer or our

customer service.

Cleaning

WARNING:

• Always unplug the appliance from the mains before

cleaning and wait until the appliance has cooled down.

• Never immerse the appliance in water to clean it. This

may lead to electrical shock or re.

CAUTION:

• Do not use wire brushes or other abrasive materials.

• Do not use caustic or scouring agents.

• Wipe away dust with a dry cloth.

• Flecks can be removed with a suitably damp cloth.

Dust on the Protective Grilles

Accumulation of dust on the protective grilles can lead to

overheating.

• Remove the dust by careful brushing.

• Use the upholstery nozzle of your vacuum cleaner to

remove the dust.

Storage

• Let the appliance cool down before putting it away!

• Wind the mains cable loosely.

• We recommend storing the appliance in its original

packaging if you do not intend to use it for a long period

of time.

• Always store the appliance out of the reach of children in

a well-ventilated and dry place.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann HL 6064 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann HL 6064 CB Manual

Product: